SOLD TNT is 4 1/4" closed, blade 3 1/4" from tip to the scale. Carries tip-up. CPM 154 blade is very slightly off center when closed.
SOLD Small Wharncliffe is 3 3/4" closed, blade 2 3/4" from tip to scale. 6K blade steel. Carries tip down.
I carried and cut with each very little and very lightly. Both are still maker-sharp. Probably some faint marks in the Ti if you look hard enough, but nothing that wouldn't come from storage and handling. Action and lock-up, fit and finish are typical of Mayo, which is to say excellent.
BOTH SOLD
Any questions shoot me a PM or e-mail.
SOLD Small Wharncliffe is 3 3/4" closed, blade 2 3/4" from tip to scale. 6K blade steel. Carries tip down.
I carried and cut with each very little and very lightly. Both are still maker-sharp. Probably some faint marks in the Ti if you look hard enough, but nothing that wouldn't come from storage and handling. Action and lock-up, fit and finish are typical of Mayo, which is to say excellent.
BOTH SOLD
Any questions shoot me a PM or e-mail.
Last edited: