FOR SALE - Two fixed blade by BF Knife Makers. I am the ONLY OWNER of both of these.
# 1- HARDEDGE KNIVES - SAWBLADE NESSMUCK with Kelly's handmade sheath.
Flat semi convex ground Nessmuk from a vintage 10 inch table saw blade; one of those that had NO carbide inserts which make very good knives. After the knife was ground the blade was differentially heat treated to an edge hardness of about 60Rc.
Blade length 4" from tip to wood scale and bright steel finish (not polished).
Overall length 9" long
Handle is black diamond wood attached to the knives full tangs with loveless bolts and epoxy.
3/16" diameter brass lined lanyard hole.
Sheath is 8/9 ounce tooled leather with belt loop.
This one is Very Lightly Used - came as a worker and looks like it. I have softened the edges of the wood, cleaned up the blade and resharpened. IT IS BETTER THAN NEW! Sharp and capable!
ASKING RELISTED USPS priority mail - PP goods and services.
______________________________________________________________________
#2 - A great fixed blade by JT KNIVES
This is one is PRISTINE - NEW and NOT USED - SHARP from maker.
Made from 1/4" thick 5160 stock and heat treated to 58-59RC with a deep hollow ground 4" blade and 9" overall length.
The handle wrap uses 12 feet of MIL-C-5040H Type III 550 cord. Sheath is set up for large TechLoc. I intended to rewrap the handle with leather but the cord wrap is so beautifully done that I felt there was nothing to gain by messing with the maker's excellent work. This is a very comfortable knife in the hand.
PLEASE PM or send e-mail through links near my avatar above.
Say you will take it PLEASE in this thread and follow up with a PM so I don't miss you.
Questions? More Photos? Kindly - don't muck up the thread - rather send a PM or email.
Thanks very much. Ray
# 1- HARDEDGE KNIVES - SAWBLADE NESSMUCK with Kelly's handmade sheath.
Flat semi convex ground Nessmuk from a vintage 10 inch table saw blade; one of those that had NO carbide inserts which make very good knives. After the knife was ground the blade was differentially heat treated to an edge hardness of about 60Rc.
Blade length 4" from tip to wood scale and bright steel finish (not polished).
Overall length 9" long
Handle is black diamond wood attached to the knives full tangs with loveless bolts and epoxy.
3/16" diameter brass lined lanyard hole.
Sheath is 8/9 ounce tooled leather with belt loop.
This one is Very Lightly Used - came as a worker and looks like it. I have softened the edges of the wood, cleaned up the blade and resharpened. IT IS BETTER THAN NEW! Sharp and capable!
ASKING RELISTED USPS priority mail - PP goods and services.
______________________________________________________________________
#2 - A great fixed blade by JT KNIVES
This is one is PRISTINE - NEW and NOT USED - SHARP from maker.
Made from 1/4" thick 5160 stock and heat treated to 58-59RC with a deep hollow ground 4" blade and 9" overall length.
The handle wrap uses 12 feet of MIL-C-5040H Type III 550 cord. Sheath is set up for large TechLoc. I intended to rewrap the handle with leather but the cord wrap is so beautifully done that I felt there was nothing to gain by messing with the maker's excellent work. This is a very comfortable knife in the hand.
PLEASE PM or send e-mail through links near my avatar above.
Say you will take it PLEASE in this thread and follow up with a PM so I don't miss you.
Questions? More Photos? Kindly - don't muck up the thread - rather send a PM or email.
Thanks very much. Ray
Last edited: