- Joined
- Jul 8, 2008
- Messages
- 1,079
Just finished this one! This series are mid-sized, and work great on deer, antelope, and similar sized animals!
OAL- 8 1/2"
blade- 4 1/16" long, .155" thick, 7/8" wide at the guard
steel- Forged Aldo's high carbon 1095, with in-house differential heat treatment
grind- a full flat grind, with distal taper
finish-etched 600 grit finish
handle-lacewood with red spacer, tru-oil finish
guard- 1/4" brass and 1/8" brass pins
sheath- 10oz leather, hand stitched, hand tooled, hot-waxed, with cam, for "snap fit", 3 copper rivets for belt loop
blade fully tested for edge retention and tip strenth before finishing
the handle had a small void on the left side next to the front pin, I filled it with exopy, and is a cosmetic flaw only.
$130 plus $10 shipping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order.
First one to post "I'll take it" gets it!!!
Ships within 48 hours of payment, priority with insurance.
Feedback appreciated, and thanks for looking!
OAL- 8 1/2"
blade- 4 1/16" long, .155" thick, 7/8" wide at the guard
steel- Forged Aldo's high carbon 1095, with in-house differential heat treatment
grind- a full flat grind, with distal taper
finish-etched 600 grit finish
handle-lacewood with red spacer, tru-oil finish
guard- 1/4" brass and 1/8" brass pins
sheath- 10oz leather, hand stitched, hand tooled, hot-waxed, with cam, for "snap fit", 3 copper rivets for belt loop
blade fully tested for edge retention and tip strenth before finishing
the handle had a small void on the left side next to the front pin, I filled it with exopy, and is a cosmetic flaw only.
$130 plus $10 shipping/insurance to CONUS. I can accept paypal Joe357m@bresnan.net or money order.
First one to post "I'll take it" gets it!!!
Ships within 48 hours of payment, priority with insurance.
Feedback appreciated, and thanks for looking!