Bill Drake
Knifemaker / Craftsman / Service Provider
- Joined
- May 25, 2021
- Messages
- 174
Happy Monday Blade Family! I wanted to get these great hunting blades in front of you all again...
This pair was designed from the onset to go together. They can be carried individually or combined "piggy-back" style via a detachable pocket molded to the smaller sheath.
Large Hunter is A2 @ 59-60 hrc., and weighs 11 oz.
0.175" x 1.75" x 10.75" OAL with blade tip to scales at 5.75".
HIgh Sabre grind with 600 grit satin finish and a mild swedge along the spine.
Handle is Walnut (from Rifle Stock) with bolster made from woodchip "Micarta", brass pins and a hand-rolled center pin from the bolster block.
- Nicely contoured and approx. 1" thick at the swell.
Sheath is Kydex with removable and reversable leather dangler attachment and security strap.
Small-ish Skinner is D2 @ 61-62 hrc., and weighs 7 oz.
0.153" x 1.5" x 8.75" OAL with blade tip to scales at 3.75".
HIgh Sabre grind with 600 grit satin finish and a lightly crowned spine.
Handle is also Walnut (from Rifle Stock) with bolster made from woodchip "Micarta", brass pins and a hand-rolled center pin from the bolster block.
- Nicely contoured and approx. 1" thick at the swell.
Sheath is Kydex with removable and reversable leather dangler attachment and security strap.
*The Kydex overstrap was molded to allow for ambidextrous vertical carry, or you can remove the dangler straps completely and carry them horizontally if preferred.*
I hope you enjoy...
Asking$550 $500 for the pair, shipped CONUS with insurance. Venmo, Zelle or PayPal.
Will consider individual pricing if you fancy one or the other...
I would love to hear what you all think of these two, and the carry setup.
Comment in here, send a DM or email with comments or questions. W.drakejr@gmail.com.
Thanks for checking them out again!
Bill
This pair was designed from the onset to go together. They can be carried individually or combined "piggy-back" style via a detachable pocket molded to the smaller sheath.
Large Hunter is A2 @ 59-60 hrc., and weighs 11 oz.
0.175" x 1.75" x 10.75" OAL with blade tip to scales at 5.75".
HIgh Sabre grind with 600 grit satin finish and a mild swedge along the spine.
Handle is Walnut (from Rifle Stock) with bolster made from woodchip "Micarta", brass pins and a hand-rolled center pin from the bolster block.
- Nicely contoured and approx. 1" thick at the swell.
Sheath is Kydex with removable and reversable leather dangler attachment and security strap.
Small-ish Skinner is D2 @ 61-62 hrc., and weighs 7 oz.
0.153" x 1.5" x 8.75" OAL with blade tip to scales at 3.75".
HIgh Sabre grind with 600 grit satin finish and a lightly crowned spine.
Handle is also Walnut (from Rifle Stock) with bolster made from woodchip "Micarta", brass pins and a hand-rolled center pin from the bolster block.
- Nicely contoured and approx. 1" thick at the swell.
Sheath is Kydex with removable and reversable leather dangler attachment and security strap.
*The Kydex overstrap was molded to allow for ambidextrous vertical carry, or you can remove the dangler straps completely and carry them horizontally if preferred.*
I hope you enjoy...
Asking
Will consider individual pricing if you fancy one or the other...
I would love to hear what you all think of these two, and the carry setup.
Comment in here, send a DM or email with comments or questions. W.drakejr@gmail.com.
Thanks for checking them out again!
Bill
...... I love your eye for lines on a.knife....
