Bill Siegle
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 3, 2000
- Messages
- 6,817
Time to merge a few posts and adding a couple new blades. All knives come with black Kydex sheaths set up for a large Tek Lok which is not supplied. Payment via USPS MO or Paypal. US shipping is included in the price.
Top knife is a Whychus Bowie with Horse Stall mat handle slabs. Made from 1/4in 5160 with my usual differential heat treat. roughly 12 5/16in overall with a 6 7/8in blade. I flat ground this and drilled out the tang so it is pretty lightweight for it's size. Price is $300.
Next is a Nessmuk knife***gone*** Steel is 3/16in thick 5160 and I tapered and drilled out the tang for weight reduction. Keep in mind I do not do many tapered tangs so this is a rare bird from my shop. 1 of maybe 4 or 5 tapered tangs I have ever done Scales are natural canvas micarta with stainless steel flared tubes. I finished the scales a little rough for texture and they feel like a sandblasted finish to me. Overall it is 8 1/2in long. The blade is 4 1/16in long tip to handle. Price is $200.
The last two in the pic are my Puukko designs. 1/8in 1095 with scandi grinds. One is orange G10 and the other is green Terro Tuff. Both have flared stainless steel tube fasteners. Overall they are 7 1/2in with 3 1/2in blades. Price for each is $150.
Now on to the new stuff
Got another of the rare tapered tang knives I have made. This is a personal user from the Summer. I made it from 3/8in 5160 and black canvas micarta. The tang is tapered and drilled out. The blade is flat ground and the false edge is ground to a semi sharp edge. 14in overall with an 8 7/8in blade.***$SOLD*** for this Camp/Fighter.
Below it is a knife I make based on the field expediant WSK made in the movie The Hunted. It is a very simple knife but the design works great as a camp blade and light chopper. You can choke up on the blade for finesse or back way out for power. This is made from 1/4in thick 5160 with flat ground bevels. The handle scales are 3/16 thick green/black G10 with copper harness rivits. 11 3/16in overall with a6 1/8in blade(tip to handle). $250 on this one.
Top knife is a Whychus Bowie with Horse Stall mat handle slabs. Made from 1/4in 5160 with my usual differential heat treat. roughly 12 5/16in overall with a 6 7/8in blade. I flat ground this and drilled out the tang so it is pretty lightweight for it's size. Price is $300.
Next is a Nessmuk knife***gone*** Steel is 3/16in thick 5160 and I tapered and drilled out the tang for weight reduction. Keep in mind I do not do many tapered tangs so this is a rare bird from my shop. 1 of maybe 4 or 5 tapered tangs I have ever done Scales are natural canvas micarta with stainless steel flared tubes. I finished the scales a little rough for texture and they feel like a sandblasted finish to me. Overall it is 8 1/2in long. The blade is 4 1/16in long tip to handle. Price is $200.
The last two in the pic are my Puukko designs. 1/8in 1095 with scandi grinds. One is orange G10 and the other is green Terro Tuff. Both have flared stainless steel tube fasteners. Overall they are 7 1/2in with 3 1/2in blades. Price for each is $150.

Now on to the new stuff

Got another of the rare tapered tang knives I have made. This is a personal user from the Summer. I made it from 3/8in 5160 and black canvas micarta. The tang is tapered and drilled out. The blade is flat ground and the false edge is ground to a semi sharp edge. 14in overall with an 8 7/8in blade.***$SOLD*** for this Camp/Fighter.
Below it is a knife I make based on the field expediant WSK made in the movie The Hunted. It is a very simple knife but the design works great as a camp blade and light chopper. You can choke up on the blade for finesse or back way out for power. This is made from 1/4in thick 5160 with flat ground bevels. The handle scales are 3/16 thick green/black G10 with copper harness rivits. 11 3/16in overall with a6 1/8in blade(tip to handle). $250 on this one.

Last edited: