ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.
For trades, I'm looking for an: MSC XL Yeti, Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Jason Clarks, Rassentis, Demkos, some Shirogorovs, Grimsmos, Marfione MSG-3, DOC, ZT 0454, and maybe a custom Emerson or Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Rick Hinderer Custom XM-18 3.5 Fatty Slicer - brand new in box with extras - $2000
Two-tone satin blade with blasted edges around the flipper
Thick Fatty blade stock but the deep hollow Slicer grind makes it thin behind the edge
Textured full ti front side
Tumbled bronzed ti handle with hints of purple
Steel Flame Spartan filler tab
Perfect fit and finish
Dead mint
Comes with a matching liner and a polished frag pattern carbon fiber scale
Flips great and the thumbstuds work perfectly
Centering is spot on, locks up with no play at all, and the action is smooth
2. EOS Squid - near mint - $450
Very well built folder with a 3.625" blade
Everything, even down to the screws, was machined all in the same shop
The inside of the frame has been extensively skeletonized so it's easier to carry than it looks
If you look closely, the machining marks were left in certain places to give it a nice effect
Blasted S35VN blade
Stonewashed ti handle with a nice satin on the flat
Flamed backspacer and clip
Opens easily with either the flipper or thumbhole and falls shut
Not 100% broken in but already runs glass smooth on ceramic bearings
Perfect centering and it locks with zero play
For trades, I'm looking for an: MSC XL Yeti, Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Jason Clarks, Rassentis, Demkos, some Shirogorovs, Grimsmos, Marfione MSG-3, DOC, ZT 0454, and maybe a custom Emerson or Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Rick Hinderer Custom XM-18 3.5 Fatty Slicer - brand new in box with extras - $2000
Two-tone satin blade with blasted edges around the flipper
Thick Fatty blade stock but the deep hollow Slicer grind makes it thin behind the edge
Textured full ti front side
Tumbled bronzed ti handle with hints of purple
Steel Flame Spartan filler tab
Perfect fit and finish
Dead mint
Comes with a matching liner and a polished frag pattern carbon fiber scale
Flips great and the thumbstuds work perfectly
Centering is spot on, locks up with no play at all, and the action is smooth
2. EOS Squid - near mint - $450
Very well built folder with a 3.625" blade
Everything, even down to the screws, was machined all in the same shop
The inside of the frame has been extensively skeletonized so it's easier to carry than it looks
If you look closely, the machining marks were left in certain places to give it a nice effect
Blasted S35VN blade
Stonewashed ti handle with a nice satin on the flat
Flamed backspacer and clip
Opens easily with either the flipper or thumbhole and falls shut
Not 100% broken in but already runs glass smooth on ceramic bearings
Perfect centering and it locks with zero play