- Joined
- Jul 22, 2014
- Messages
- 1,050
These knives have been designed, carefully worked, and tested for their best performance. Rohde knives are meant to get scratched, used ,abused but then clean and cared for, sharpened and oiled...and then to be passed on to the next generation. Give your knife the use and care it deserves. If you take care for it will take care of you.
These Shark Tail Necker's are one of my very first knife designs they are largely my own design as far as I know they are unique to me. They are meant to be that knife that is always there and always sharp. They aren't designed to be heavy prying knives, they aren't supposed to split wood and they're not supposed to be thrown all over creation. There meant to be that knife that is with you in all the little things the whittling a trap or cutting up the roast, the fire started and the fish cleaner the indispensable knife that you wouldn't want to go without-That's what it is for-
THIS KNIFE HAS A SMALL DEFECT(ONLY COSMETIC) !! THE ALUMINUM LINER DOES NOT GO ALL THE WAY THROUGH ON ONE SIDE!
This is my first knife to have "52100" marked on one side(which is the steel type)
Dimensions:
Overall Weight: 3.80 oz
BLADE
Steel: 52100 (differential heat treat)
Hardness: About 60HRC
Overall Length: 7"
Blade Length**: 3 1/4"
Width: 1 1/8"
Spine Thickness: .093"
¼ Back from the Edge: .030"
Edge Thickness: .005 or less
Finish: Etched
Grind: Flat
Spine is smooth and rounded, Comes with a Smiths 325 grit Edge
HANDLE:
Finish: Buffed
Material: Diamond Rosewood With Black G10 and aluminum liner(liner on the right side does not go all the way)
Pins:Brass/stainless loveless bolts
Ambidextrous handle
SHEATH:
.060" Black Kydex with black eyelets and a green para cord lanyard
The sheath has a nice click in fitt and is easy to draw
-The Eyelets in this sheath are spaced to fit the large Tek-lok belt loop(1 1/2" between center)
-Edges are buffed
Price: $135 Shipped CONUS(this includes all fees)
First to post "I'll Take It!" gets it! Get me your email and I'll send you a Paypal Invoice. If you have any questions you can email me at: RohdeEdge@gmail.com
Also available on my website(you can pay with Paypal there as well, if you don't want to email me and wait for the invoice the web is the way to go. Either is fine though)
*Blade Length is measured from the point to the start of the handle scales
**Width is measured at the ricasso
If you have any comments or questions just let me know. If you would like something similar send me and email and we can talk about a custom order
Thanks for looking!
Daniel Rohde
These Shark Tail Necker's are one of my very first knife designs they are largely my own design as far as I know they are unique to me. They are meant to be that knife that is always there and always sharp. They aren't designed to be heavy prying knives, they aren't supposed to split wood and they're not supposed to be thrown all over creation. There meant to be that knife that is with you in all the little things the whittling a trap or cutting up the roast, the fire started and the fish cleaner the indispensable knife that you wouldn't want to go without-That's what it is for-
THIS KNIFE HAS A SMALL DEFECT(ONLY COSMETIC) !! THE ALUMINUM LINER DOES NOT GO ALL THE WAY THROUGH ON ONE SIDE!
This is my first knife to have "52100" marked on one side(which is the steel type)
Dimensions:
Overall Weight: 3.80 oz
BLADE
Steel: 52100 (differential heat treat)
Hardness: About 60HRC
Overall Length: 7"
Blade Length**: 3 1/4"
Width: 1 1/8"
Spine Thickness: .093"
¼ Back from the Edge: .030"
Edge Thickness: .005 or less
Finish: Etched
Grind: Flat
Spine is smooth and rounded, Comes with a Smiths 325 grit Edge
HANDLE:
Finish: Buffed
Material: Diamond Rosewood With Black G10 and aluminum liner(liner on the right side does not go all the way)
Pins:Brass/stainless loveless bolts
Ambidextrous handle
SHEATH:
.060" Black Kydex with black eyelets and a green para cord lanyard
The sheath has a nice click in fitt and is easy to draw
-The Eyelets in this sheath are spaced to fit the large Tek-lok belt loop(1 1/2" between center)
-Edges are buffed
Price: $135 Shipped CONUS(this includes all fees)
First to post "I'll Take It!" gets it! Get me your email and I'll send you a Paypal Invoice. If you have any questions you can email me at: RohdeEdge@gmail.com
Also available on my website(you can pay with Paypal there as well, if you don't want to email me and wait for the invoice the web is the way to go. Either is fine though)
*Blade Length is measured from the point to the start of the handle scales
**Width is measured at the ricasso
If you have any comments or questions just let me know. If you would like something similar send me and email and we can talk about a custom order
Thanks for looking!
Daniel Rohde
