RohdeEdge - SharkTail Neck Knife (Hickory Handle)

Daniel Rohde

Daniel Rohde

Feedback: +30 / =0 / -0
Joined
Jul 22, 2014
Messages
1,050
These Shark Tail Necker's are one of my very first knife designs they are largely my own design as far as I know they are unique to me. They are meant to be that knife that is always there and always sharp. They aren't designed to be heavy prying knives, they aren't supposed to split wood and there not supposed to be thrown all over creation. There meant to be that knife that is with you in all the little things the whittling a trap or cutting up the roast, the fire started and the fish cleaner...the indispensable knife that you wouldn't want to go without

Dimensions:
Overall Weight: 4.60 oz
BLADE:
Steel: 52100
Overall Length: 7"
Blade Length**: 3 1/4"
Width: 1 3/16"
Spine Thickness: .104"
¼ Back from the Edge: .037"
Edge Thickness: .007"
Finish: 120Grit belt finish with 400 grit flats
Grind: Flat
Spine is smooth and rounded, Comes with a Smiths 325 grit Edge

HANDLE:
Finish: 400Grit satin finish, Oiled
Material: Hickory Handles with white G10 Liners and Natural Micarta
Pins: Brass/Stainless Loveless bolts
Right handed

SHEATH:
.093" Black Kydex with black eyelets and a charcoal para cord lanyard
The sheath has a nice click in fit and is easy to draw
-The Eyelets in this sheath are spaced to fit the large Tek-lok belt loop(1 1/2" between center)
-Edges are buffed

Price: $125 Shipped CONUS
First to post "I'll Take It!" gets it! Get me your email and I'll send you a Paypal Invoice. If you have any questions you can email me at: RohdeEdge@gmail.com
Also available on my website(you can pay with Paypal there as well, if you don't want to email me and wait for the invoice the web is the way to go. Either is fine though)

*Blade Length is measured from the point to the start of the handle scales
**Width is measured at the ricasso

I will be adding more pictures later and will add it to the web

411642383.jpg


If you have any comments or questions just let me know. If you would like something similar send me and email and we can talk about a custom order

Thanks for looking!

Daniel Rohde
 
Daniel, do you make these in any other steels? I think this would make a very fine companion knife for those who like to piggyback a smaller blade on their big choppers. Really nice design!
 
TheScoundrel_70 said:
Daniel, do you make these in any other steels? I think this would make a very fine companion knife for those who like to piggyback a smaller blade on their big choppers. Really nice design!
Click to expand...

I haven't I mainly work in 52100(I really like it) but I do work in AEB-L stainless and am planing on ordering a sheet of it here in a week so will plan on cutting out a few in that.

I second this question! Are stainless neckers a possibility? Necks and pockets can be corrosive places to carry 52100.
Click to expand...
Yep! see the answer above.

Thanks for the looks guys!
DR...
 
You must log in or register to reply here.
Back
Top