Routing For JK Knives Passaround

JK Knives

Moderator
Joined
Mar 6, 2001
Messages
28,225
Here is the routing I came up with for the Bushcrafter passaround.

1 Brian Jones
2 dttomcat
3 dczippo
4 k estela
5 Big Mike
6 PB Wilson
7 TFin04
8 cmdionne
9 Jeff H
10 cmdr249
11 SpookyPistolero
12 kiahs
13 Rockywolf
14 udtjim
15 j williams
16 BarberFobic1992
17 orrey45
18 on the edge
19 gruntinhusaybah
20 C Bryant
21 naked


When a reviewer`s 5 days are almost up, they can email me for the next reviewer`s mailing info.

Thanks to all of you guys for taking the time to do this. The knife will be shipping to the first reviewer around January 1st.

John
 
Last edited:
Cool John, I'm very, very excited to check this blade out.

Possibly suggestion: In running a pretty unsuccessful passaround (which needs prodding, sorry Jake), I can now suggest considering putting in a paper that has the shipping addresses printed on it. That way there is no excuse not to go ahead and ship, and you don't have to keep as close an eye on it (or answer weekly messages about it). Just a thought!
 
Good idea. Dont know if wouldve helped our passaround. I have no idea who has it, or for how long. No worries though. Wouldve been neat to see the completed kit though. I think it is dead in the water bro.
 
Cool John, I'm very, very excited to check this blade out.

Possibly suggestion: In running a pretty unsuccessful passaround (which needs prodding, sorry Jake), I can now suggest considering putting in a paper that has the shipping addresses printed on it. That way there is no excuse not to go ahead and ship, and you don't have to keep as close an eye on it (or answer weekly messages about it). Just a thought!

Sounds like a good idea! :thumbup: I`m outside heat treating today, but I`m coming in a lot to defrost, it`s like 8 degrees. The passaround one is one of them I`m doing today, along with 3 "Tin" knives for C Bryant, Bear`s "special" blade, and a couple of "Camp and Kitchen" blades, a 6" chefs type and a smaller utility knife,3/32" thick.
 
Sounds like a good idea! :thumbup: I`m outside heat treating today, but I`m coming in a lot to defrost, it`s like 8 degrees. The passaround one is one of them I`m doing today, along with 3 "Tin" knives for C Bryant, Bear`s "special" blade, and a couple of "Camp and Kitchen" blades, a 6" chefs type and a smaller utility knife,3/32" thick.

Wowza! You've got a bucket full of work for ya! That's always a good thing to hear. :thumbup:
 
You never got the first aid kit back? Unreal. Post something asking where it is! That's crap. The person needs to hold up their end of the bargin and apologize, IMO.
 
It's my fault, because I haven't been 'prodding' people that have received it. School took up my focus. Sadly people don't get in touch with me to ship it and take the initiative.

After my finals are over this week I'm going to bring back the thread and call it to an end, and have the last person ship it to Jake. I don't want the people who have already contributed to get the shaft.

Then we'll have some pics, some thoughts, and give it away!
 
It's my fault, because I haven't been 'prodding' people that have received it. School took up my focus. Sadly people don't get in touch with me to ship it and take the initiative.

After my finals are over this week I'm going to bring back the thread and call it to an end, and have the last person ship it to Jake. I don't want the people who have already contributed to get the shaft.

Then we'll have some pics, some thoughts, and give it away!

No way am I going to let you take the blame, Will. School or not, you do NOT have to nag people to follow some simple instructions. The blame is with them, not you.
 
I'll post something. Will, Rockywolf is right...people need to be adults and take responsibility.

John, apologies for the thread derailment. Back on track now.
 
Thanks for including me on this John. Can't wait to see a blade from a maker I've been interested in for a long time.

:thumbup:
 
Good idea about including the next name. I would have to send it to "j" what's his name.:D

Thanks John.
 
Seems I remember hearing something about those who are first shall be last, and those who are last shall be first?!

:D
 
Back
Top