Rusty Preston, Matt Lerch, Keith Coleman, M. Pulliam, D. Broadwell, P. Marzitelli x 2

Feedback: +7 / =0 / -0
Joined
May 2, 2005
Messages
316
ALL PRICES INCLUDE INSURED SHIPPING BY USPS PRIORITY MAIL IN THE CONUS.

NOT INTERESTED IN ANY TRADES AT THIS TIME.

Rusty Preston Jumbo Two-Blade Saddlehorn Trapper. Acquired directly from Rusty at the Blade Show in 2011. It is in the same condition as when it was received. It has never been used, carried or re-sharpened. Both blades lock-up tight with no play, and the blades appear to be centered in the liners. It has been stored in a safe inside a lined, zippered pouch which I will include when it is shipped to the new owner.

The knife measures just shy of 8" in overall length. Each blade is 3 1/2" long. The closed length is 4 1/2". The knife weighs in at 7.6 ounces. The blades have a hand-rubbed satin finish, and are either ATS-34 or CPM 154 (I cannot recall which - Rusty uses both steels). The handle is made from 2 well-matched pieces of Giraffe Bone. The fluted mirror polished bolsters are 416 stainless steel. There is Roman Knot pattern filework on the blade spines and backsprings all the way around to the stainless steel liners. Both blades have half stops and nail nicks. The blades have a secure pull, and a resounding "snap" when closing.

There is a hairline on the end of the Spey blade that I have tried to capture in one of the last pictures. It has always been there. You can hardly see it unless viewed at the precise angle – and you certainly can’t feel it. I am sure Rusty would gladly buff it out.

Asking $975 Postal Money Order or PayPal.

IMG_2897.jpg

IMG_2904.jpg

IMG_2900.jpg

IMG_2903.jpg

IMG_2907.jpg

IMG_2910.jpg

IMG_2909.jpg

IMG_2908.jpg

IMG_2906.jpg

IMG_2911.jpg


Matthew Lerch handmade tactical folding knife. This is an early model. Today Matt makes high end folders that sell for thousands of dollars. This is a manual knife.

This knife is approximately 8" in OAL. The blade is 3 1/2" long. The blade is stainless steel Damascus, and I believe the handle is G10 with grooves running down either scale. Also notice the alternating notches cut in the liners on both the top and bottom sides of the knife - a nice touch that give the knife a great look. It is light and quick in your hand.
This is a great feeling knife in-hand, and the action is smooth. Lock up is solid - no blade play in any direction. The blade is nicely centered between the handle when closed.
I am the original owner of this knife. I intended to put it in my carry rotation, but never got around to doing anything with it, except handle it. It has not been used, and it has not been re-sharpened. It is in as-new condition, from the maker.

Asking $625 Postal Money Order or PayPal.

IMG_2492.jpg

IMG_2490.jpg

IMG_2486.jpg

IMG_2494.jpg

IMG_2495.jpg

IMG_2498.jpg


Keith Coleman handmade tactical folding knife. Not sure what model he called this one. I don't believe that Keith is currently making knives, so what's out in the secondary market is about it.

This knife is approximately 9" in OAL. The blade is 4" long. It is marked Keith Coleman Los Lunas, NM. I don't know the blade steel is. The handle is smooth micarta. Keith has done a nice job dovetailing the bolsters, as you can see in a couple of the pictures.

This is a beefy handled knife, and the action is smooth. Lock up is good, with only the slightest evidence of movement (if you don't open the blade firmly). I'm a stickler about fit and finish, and this movement is barely perceptible. The blade is nicely centered between the handle when closed. Serrated thumb ramp ensures a secure grip.
I am the second owner of this knife. The former original owner carried it a couple of times, as is evidenced by the rubs (not scratches) that you see on the upper portion of the bolster on the clip side. It has not been used, and it has not been re-sharpened.

Asking $425 Postal Money Order or PayPal.

IMG_2474.jpg

IMG_2475.jpg

IMG_2477.jpg

IMG_2480.jpg

IMG_2481.jpg

IMG_2483.jpg


Morris C. Pulliam (Shelbyville, KY) slip joint folding knife. I recently learned from one of his relatives that he passed away in May 25, 2011, and his extensive collection of guns and knives were auctioned off.

I cannot recall the blade steel. The handle - if I recall correctly - is cocobola (or some other stablized dark hardwood). I believe the front bolster and pins are nickel silver. The blade measures 3 1/4" long, and the overall length is just shy of 8" long.

I am not the original owner. It appears to have been carried and / or handled by the previous owner. It does not appear to have been sharpened. It is in very good condition. There are some fine lines on the blade, which may be visible in the pictures - nothing that can be felt as you pass your fingernail over them. They are all very fine surface marks - nothing deep. The wood handle is free of any marks.

It has been safely stored in my safe in a lined, zippered pouch (included with the knife). It is well-made. It opens smoothly, locks up tight in the half and open positions with no blade play or wobble, and the blade is aligned close to center in the handle when closed. The nail nick pull is towards the front of the blade. It has a decent pull to it, and it closes with a resoundingly loud "snap". The blade is marked "Pulliam" and the number "7" on one side, and the number "81" on the other. I believe the 7 was a model number, and the 81 was the year it was made.

Asking $250 Postal Money Order or PayPal.

IMG_0946.jpg

IMG_0949.jpg

IMG_0950.jpg

IMG_0953.jpg

IMG_0960.jpg

IMG_0954.jpg


David Broadwell fixed blade tactical knife, model LDC-F-2. These were made specifically for Les Robertson at Robertson Custom Cutlery several years ago. This was a project that involved a number of very well-known knife makers, who made both fixed blade and folding knives for the LDC series. They all sold out fast, and do not come up for sale very often these days.

This is serial #40 of 50. These days, David Broadwell makes high-end art knives and pens. This is the perfect everyday carry (EDC) knife - it's lightweight, has a narrow profile, and comes with a kydex sheath that can be mounted in a couple of different positions.

It measures 8 1/2" in overall length, the blade is approximately 4" long, and the top edge is sharpened about 2 1/2" back from the tip. There are upper and lower notches for forefinger and thumb placement.

I am the original owner of this knife. It has never been used, sharpened or carried. It is in as-new condition.

Asking $375 Postal Money Order or PayPal.

IMG_1411.jpg

IMG_1412.jpg

IMG_1420.jpg

IMG_1422.jpg


Peter Marzitelli tactical folding knife. I am the original owner. I have had it in my collection for about 5 or so years. I do not recall what model he called this one. However, this is a lot of knife for the money. His "Marz" knives are world renowned for their artistry, craftsmanship, attention to detail and uniqueness. This knife is a perfect example of his work.

The knife is in virtually mint condition. It has never been used, carried or sharpened. The overall length is 7 3/4", and the blade is 3 1/4" long. This is a rather unique framelock folder, as the lockbar side also has a bolster and scale just like the opposite side - so both sides match. This knife locks up strong and tight as a vault with a resounding click. There is absolutely no blade play in any direction, and the blade is perfectly centered in the handle when closed.

The blade is Stainless Damascus, as is the pocket clip. The bolsters are carbon fiber. If I recall correctly the exotic wood used for the handle scales is Cocobolo. Engraved in the wood is Peter's signature maker's mark "pterodactyl". There is also an ambidextrous thumbstud and textured thumb ramp. There's a huge amount of work and materials that has gone into making this knife. This knife feels very substantial in-hand.

Asking $550 Postal Money Order or PayPal.

IMG_2191.jpg

IMG_2194.jpg

IMG_2195.jpg

IMG_2197.jpg

IMG_2202.jpg

IMG_2204.jpg


Peter Marzitelli tactical folding knife. Not sure what model he called this one, but I know that it came from his G.U.T.S. series of tactical knives. This one is all camo - both the handle and the blade has a camo finish. His signature pterodactyl is on the blade. I don't believe that Peter is currently making the G.U.T.S. line of knives any longer.

This knife is approximately 8 1/2" in OAL. The blade is 3 1/2" long. I don't know the blade steel, and I believe the handle is micarta.

This is a great feeling knife in-hand, and the action is smooth. Lock up is solid - no blade play in any direction. The blade is nicely centered between the handle when closed.
I am the original owner of this knife. I intended to put it in my carry rotation, but never got around to doing anything with it, except handle it. It has not been used, and it has not been resharpened.

Asking $425 Postal Money Order or PayPal.

IMG_2462.jpg

IMG_2464.jpg

IMG_2465.jpg

IMG_2468.jpg

IMG_2469.jpg
 
Back
Top