Robert Erickson
Knifemaker / Craftsman / Service Provider
- Joined
- Feb 2, 2014
- Messages
- 2,882
I've got two up for grabs in this thread.
The first one is a CPM-S35VN steel Bird & Trout knife. The handle is dyed camel bone with C-Tek bolsters and blue G10 liners. It comes with a handmade leather sheath for vertical carry. It's sharpened with my KME system to 17 DPS and leather stropped with green compound.
SPECS:
OAL: 8.5"
BLADE: 4" full flat grind with a 220 grit satin finish. The edge was 0.007" before sharpening.
STEEL: 0.13" CPM-S35VN heat treated by Peter's to RC60
HANDLE: Dyed camel bone with C-Tek bolsters and blue G10 liners. The pins are black micarta and the lanyard tube is carbon fiber.
SHEATH: Handmade tooled leather
price dropped to $175 shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders welcome.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
The second is a trailing point skinner in D2 steel and Black Mesquite with Black Canvas Micarta bolsters and pins. The liners are black canvas micarta and orange G10 and the lanyard tube is carbon fiber.
Specs:
OAL: 8.75"
Blade: 4" full flat grind, 600 cork belt finish, distal taper and convex edge. Edge thickness before convexing 0.015" sharpened to 17 DPS to 1500 grit on the KME system then stropped on leather with green compound
Steel: 0.156" D2 HT by Peter's to RC60
Handle: Contoured Black Mesquite finished with Tru-Oil, black micarta bolsters and pins, orange G10 and black micarta liners. Mosaic pin and carbon fiber lanyard tube.
Sheath: Leather sheath included
Price drop to $SOLD Shipped CONUS
Paypal, checks and money orders accepted. International buyers welcome, shipping extra.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
Comments/Critiques/Questions welcome as always.
The first one is a CPM-S35VN steel Bird & Trout knife. The handle is dyed camel bone with C-Tek bolsters and blue G10 liners. It comes with a handmade leather sheath for vertical carry. It's sharpened with my KME system to 17 DPS and leather stropped with green compound.
SPECS:
OAL: 8.5"
BLADE: 4" full flat grind with a 220 grit satin finish. The edge was 0.007" before sharpening.
STEEL: 0.13" CPM-S35VN heat treated by Peter's to RC60
HANDLE: Dyed camel bone with C-Tek bolsters and blue G10 liners. The pins are black micarta and the lanyard tube is carbon fiber.
SHEATH: Handmade tooled leather
price dropped to $175 shipped CONUS, international buyers welcome shipping extra.
Paypal, checks and money orders welcome.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
The second is a trailing point skinner in D2 steel and Black Mesquite with Black Canvas Micarta bolsters and pins. The liners are black canvas micarta and orange G10 and the lanyard tube is carbon fiber.
Specs:
OAL: 8.75"
Blade: 4" full flat grind, 600 cork belt finish, distal taper and convex edge. Edge thickness before convexing 0.015" sharpened to 17 DPS to 1500 grit on the KME system then stropped on leather with green compound
Steel: 0.156" D2 HT by Peter's to RC60
Handle: Contoured Black Mesquite finished with Tru-Oil, black micarta bolsters and pins, orange G10 and black micarta liners. Mosaic pin and carbon fiber lanyard tube.
Sheath: Leather sheath included
Price drop to $SOLD Shipped CONUS
Paypal, checks and money orders accepted. International buyers welcome, shipping extra.
Post "I'll take it" here in this thread and then PM or email me (robertericksonknives at gmail dot com) for payment arrangements.
Comments/Critiques/Questions welcome as always.
Last edited: