S35VN Hunter in Buckeye Burl *withdrawn*

[Robert Erickson]

Hi all I'm posting a Hunter in S35VN stainless steel. It's been heat treated by Peter's to RC61 and hand finished to 600 grit. The grind is full flat with a subtle convex to 0.09" edge thickness before sharpening. The handle is some beautiful Buckeye Burl with Manzanita bolsters. The pins are black micarta and the liners are black micarta and grey G10.
The sheath is handmade stacked leather.
SPECS:
OAL: 9.5"
Blade: 4.5" long, 1.37" wide, full flat with subtle convex to 0.09" before sharpening, 600 grit hand finish.
Steel: 0.13" S35VN heat treated by Peter's to RC61
Handle: Stabilized Buckeye Burl, Manzanita bolsters, Black micarta liners and pins, grey G10 pinstripe and spacer.
Sheath: Handmade stacked leather.
$255 Shipped CONUS, international buyers welcome shipping extra.
Post "I'll take it here" in this thread and then PM or email me for arrangements.
Paypal, checks and money orders accepted.
Comment/Questions/Critiques welcome
Thanks!

fullsizeoutput_474 by Robert Erickson, on Flickr

fullsizeoutput_473 by Robert Erickson, on Flickr

fullsizeoutput_475 by Robert Erickson, on Flickr

fullsizeoutput_476 by Robert Erickson, on Flickr

fullsizeoutput_477 by Robert Erickson, on Flickr

fullsizeoutput_47a by Robert Erickson, on Flickr

fullsizeoutput_479 by Robert Erickson, on Flickr

fullsizeoutput_471 by Robert Erickson, on Flickr

 

[Simon Kokkinakis]

Beautiful work Rob.
I would go perfectly with the one I bought from you in ringed gidgee but I'm
waiting for you to make one with Koa.
Whoever picks this up will be very happy!

Simon

 

[Robert Erickson]

Beautiful work Rob.
I would go perfectly with the one I bought from you in ringed gidgee but I'm
waiting for you to make one with Koa.
Whoever picks this up will be very happy!

Simon

Thanks Simon I'll have to dip into my Koa stash sometime

 

[Rapt_up]

That is one beautiful knife

 

[jm4738]

Simply stunning!

 

[Eric J.S.]

Awesome work! That's a really good looking knife

 

[Robert Erickson]

That is one beautiful knife

Simply stunning!

Awesome work! That's a really good looking knife

Thanks gentlemen!

 

[rjn]

Hi all I'm posting a Hunter in S35VN stainless steel. It's been heat treated by Peter's to RC61 and hand finished to 600 grit. The grind is full flat with a subtle convex to 0.09" edge thickness before sharpening. The handle is some beautiful Buckeye Burl with Manzanita bolsters. The pins are black micarta and the liners are black micarta and grey G10.
The sheath is handmade stacked leather.
SPECS:
OAL: 9.5"
Blade: 4.5" long, 1.37" wide, full flat with subtle convex to 0.09" before sharpening, 600 grit hand finish.
Steel: 0.13" S35VN heat treated by Peter's to RC61
Handle: Stabilized Buckeye Burl, Manzanita bolsters, Black micarta liners and pins, grey G10 pinstripe and spacer.
Sheath: Handmade stacked leather.
$255 Shipped CONUS, international buyers welcome shipping extra.
Post "I'll take it here" in this thread and then PM or email me for arrangements.
Paypal, checks and money orders accepted.
Comment/Questions/Critiques welcome
Thanks!

fullsizeoutput_474 by Robert Erickson, on Flickr

fullsizeoutput_473 by Robert Erickson, on Flickr

fullsizeoutput_475 by Robert Erickson, on Flickr

fullsizeoutput_476 by Robert Erickson, on Flickr

fullsizeoutput_477 by Robert Erickson, on Flickr

fullsizeoutput_47a by Robert Erickson, on Flickr

fullsizeoutput_479 by Robert Erickson, on Flickr

fullsizeoutput_471 by Robert Erickson, on Flickr

Hi all I'm posting a Hunter in S35VN stainless steel. It's been heat treated by Peter's to RC61 and hand finished to 600 grit. The grind is full flat with a subtle convex to 0.09" edge thickness before sharpening. The handle is some beautiful Buckeye Burl with Manzanita bolsters. The pins are black micarta and the liners are black micarta and grey G10.
The sheath is handmade stacked leather.
SPECS:
OAL: 9.5"
Blade: 4.5" long, 1.37" wide, full flat with subtle convex to 0.09" before sharpening, 600 grit hand finish.
Steel: 0.13" S35VN heat treated by Peter's to RC61
Handle: Stabilized Buckeye Burl, Manzanita bolsters, Black micarta liners and pins, grey G10 pinstripe and spacer.
Sheath: Handmade stacked leather.
$255 Shipped CONUS, international buyers welcome shipping extra.
Post "I'll take it here" in this thread and then PM or email me for arrangements.
Paypal, checks and money orders accepted.
Comment/Questions/Critiques welcome
Thanks!

fullsizeoutput_474 by Robert Erickson, on Flickr

fullsizeoutput_473 by Robert Erickson, on Flickr

fullsizeoutput_475 by Robert Erickson, on Flickr

fullsizeoutput_476 by Robert Erickson, on Flickr

fullsizeoutput_477 by Robert Erickson, on Flickr

fullsizeoutput_47a by Robert Erickson, on Flickr

fullsizeoutput_479 by Robert Erickson, on Flickr

fullsizeoutput_471 by Robert Erickson, on Flickr

Robert,
This is your finest work yet! The blade,handle and leather work is terrific. Is the buckeye died?
Richard

 

[Robert Erickson]

Thanks Richard! The Buckeye was not dyed, some of the pics came out slightly different.

 

[Robert Erickson]

I’m withdrawing this knife from consideration.
I've decided to raffle this knife off on Instagram. Check out my Instagram @ericksonknifeworks if interested.