CPE_Knives
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 29, 2012
- Messages
- 1,704
Good Afternoon,
The blade is 0.265" Magnacut hollow ground on a 4" wheel top and bottom to 400 grit and then finished on an ultra fine scotch brite belt. It has a really nice profile with a fine edge and a robust tip. The sheath is setup for IWB with a belt loop and is ambidextrous. I used a D ring this time instead of a rectangular ring and it allows the sheath to rotate a little more easily making it even more comfortable to carry. The d ring you are not using folds flat so you cannot feel it.
The IWB picture is on the left side for right hand cross draw. I took it in a mirror so it looks like it is on the right.
I got a decent picture of the tip and profile but had to include a close up of my beat up looking hand. I have definitely ruined my future career as a hand model.
It came out very light and balanced for a knife this size at 7.7 ounces. As a reference the Strider SMF is 6.10 ounces so this is not bad for a fixed blade this size and thickness. The balance is right where your first finger sits on the handle.
Handle is OD green micarta with stainless hardware
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 0.265" Magnacut
Grind: Hollow 4" wheel
Blade: 5 1/8"
Handle Material: Burlap micarta with 9 micarta pins
Overall Length: 10 1/16"
Sheath: leather
Weight: 7.7 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
The blade is 0.265" Magnacut hollow ground on a 4" wheel top and bottom to 400 grit and then finished on an ultra fine scotch brite belt. It has a really nice profile with a fine edge and a robust tip. The sheath is setup for IWB with a belt loop and is ambidextrous. I used a D ring this time instead of a rectangular ring and it allows the sheath to rotate a little more easily making it even more comfortable to carry. The d ring you are not using folds flat so you cannot feel it.
The IWB picture is on the left side for right hand cross draw. I took it in a mirror so it looks like it is on the right.
I got a decent picture of the tip and profile but had to include a close up of my beat up looking hand. I have definitely ruined my future career as a hand model.
It came out very light and balanced for a knife this size at 7.7 ounces. As a reference the Strider SMF is 6.10 ounces so this is not bad for a fixed blade this size and thickness. The balance is right where your first finger sits on the handle.
Handle is OD green micarta with stainless hardware
Price SOLD , shipping is included to continental United States via USPS. Preferred payment is via paypal.
Blade Steel: 0.265" Magnacut
Grind: Hollow 4" wheel
Blade: 5 1/8"
Handle Material: Burlap micarta with 9 micarta pins
Overall Length: 10 1/16"
Sheath: leather
Weight: 7.7 ounces
If you would like additional pictures or have questions please contact me at cpeknives@gmail.com
Comments are welcome thank you for looking,
Paul
Last edited:
