Scrap Yard WS-221 w/ Scrap Satin Finish + Father & Son's Upgraded Slicing Edge @ 12 DPS, $111 Shipped & Paypal'd TYD!

[Father & Son Traditional Sharpening]

Scrap Yard Knife Company​

WS-221​

- Scrap Satin Finish
- Black Resiprene C Handle


- Features Father & Son Edge Regrind to 12 Degrees Per Side - ZERO CHANCE OF LOSING TEMPER SINCE I USE A TORMEK MACHINE!
- Final Edge Applied Using Waterstones! (Guaranteed Sharp Or I'll Give You YOUR MONEY BACK!)
Edge Finished w/ Naniwa 1000 Grit Waterstone, Micro Bevel @ 15 DPS w/ DMT Fine Diamond Plate (Good Balance Of Slicing Edge Retention & Push Cutting)
- Blade Has Been Treated w/ Eezox Knife Care (Dry Lubricant & Rust Preventative)


BRAND NEW!

"Meet the SYKCO MS-221. This knife sports a 3” flat saber ground blade that is ideal for slicing and working in tight spaces. Matched with the legendary Resiprene C handle and you have one great feeling knife." - Dumpster Dan

Specifications:
Blade Length = Approx. 3”
Overall Length = Approx. 7.75”
Thickness = Approx. .115
Weight = Approx. 4 oz.
Grind/Bevel = Flat Saber Grind
Finish = Scrap Satin
Handle = Resiprene C
Steel = SR-101
Hardness = 58 – 60 Rc

Scrap Yard Knife Co. Regular Retail Price : $89 + $14.95 Shipping
Father & Son Edge Reprofile : $20
Finish Sharpening w/ Waterstones : $20


Total Retail Value: $144 YOU SAVE $33!!!

Asking $111 Shipped TYD via Regular Paypal or USPS Money Order

PLEASE SEE MY FEEDBACK HERE AT FORUM & DEAL WITH CONFIDENCE!!
259 POSITIVE FEEDBACK'S @ Bladeforums.com & COUNTING!!











​

 

[Father & Son Traditional Sharpening]

Here's what a recent buyer had to say about a virtually identical twin knife to the one listed here with the same edge geometry....

Knife showed up and is superb, very well done. Not too thick, not too thin, gonna be a perfect user/woodswalker blade.

Thank you!

This review was entirely unsolicited and I did not ask for any sort of feedback on the knife, so I can say it is genuine...

Upon receiving it in the mail, he then bought a similar knife(WS-1020) I had modded because he was so happy with the performance..... AND sent me an email that he loved the WS-1020 also and was interested in buying another knife from me!



The BIG question, why would you want an edge at this geometry over the standard? If you cut nothing but metal, you'll prefer the factory geometry... but if you are cutting the types of things MOST human beings cut regularly... you will be safer using this knife (with care) because of the reduced force required to cut vs. factory edge geometry AND because less force is required to cut you will get far less fatigued in use. As a bonus, you will also gain a significant amount of edge retention due to the nature of how knives blunt...

The best part is... AT THIS PRICE, you are literally getting the regrind and sharpening FOR FREE!!