Selling Out Knife Making Shop

H

HR654

Feedback: +0 / =0 / -0
Joined
Jun 23, 2006
Messages
8
2 year old KMG Grinder on factory 1/2" steel base with custom made table 2hp 115/220 1phz 60hrz motor. With 14" smooth rubber wheel and attachment, 1" wheel small wheel attachment, platen with attachment with several new or like new belts.
6" sharpener on delta grinder motor
8" grinder with new stone wheels
115v heat treating oven
Vertical propane forge
Vertical quinch oil tank
Several bars of damascus made by Alabama Damascus.
Knife blanks made of cable damascus and damascus. ( I will e-mail you the makers name upon request)
Nickel plates
Boxes of antler/horn/mother of pearl/stone slabs/wood/gems stones, (ruby's/garnets/amethist/tourquoise and a lot more)
Boxes of od's and end's hardware
$6000 for all.
We can deliver.Thanks! Howard
We are in Mission, Texas. We travel a lot so we may be able to deliver for gas money.
 
If you will be separating the items I may be interested in the Odds and ends hardware and the antler handle material as well as the other mentioned materials. I also would be interested in the KMG. Possibly even the knife blanks. What styles etc. I am not sure if you are willing to separate.
 
Me too ! let us know if your looking for a package deal or selling a-la cart ee some good stuff here :)
 
Put me down as #2 in line for the heat treat oven. I'd like to know what brand and see some specs, but I'm very interested and have cash but would need it shipped to Ca 93065.

I might also be interested in the small wheel attachment for the KMG if you decide to break up the package.
 
My heat treating oven is a old enameling oven. But I want to sell it all. Maybe if I get no offers by the end of the week I will part it all out.
Thanks!
Howard
 
HR654 said:
I wanted to sell everything all together. Thats why I said $6000 for all.
Click to expand...

I can undersatnd you'r enot wanting to go through all the extra effort to part it out. Unfortunately, most of us knifemakers aren't so well financed as to buy a whole shop at once, and we probably already have some of the tools, or perhaps a lot of them. The ideal customer would be a newbie maker that wanted everything all at once and had the cash to do it. I'm not sure I've seen one of them yet. MOst of us, mybe you too, got started with a hacksaw and files and if we stuck with it, added a piece here and a piece there and finally ended up with enough tools to be a problem for our wives if we suddenly keel over :)

Good luck with your sale either way.
 
I will be interested in the handle material if you do change your mind in parting out. But, if not, wish you luck in selling the lot......

HOOOAH!!!!!

Daniel Prentice
 
OK.
I will have lot's of photos taking to do. But just send me an e-mail and I will send you photos of the stuff your interested in.
First come first serve. I do have a PayPal acount that takes credit cards. And I will expect buyer to pay shipping. Remember, I will be going back to Ohio soon so I may be able to drop it off.
Thanks!
Howard rcme@hidalgoaviation.com
 
Jimbo670 said:
Cannot email you I keep getting failure notice. Any suggestions?
Click to expand...

Try right click and copy my e-mail address then past on the compose ,"To" send me an e-mail.
Or just send me a private message with your e-mail.
Thanks!
Howard
 
I would be interested in the grinder if you decide to sell it all seperatley..looks like that may be the way to go with interest in the other stuff..:)
 
CDiprecision said:
I would be interested in the grinder if you decide to sell it all seperatley..looks like that may be the way to go with interest in the other stuff..:)
Click to expand...

Just e-mail me and I will send photos of the grinder.
Thanks!
Howard
 
i actualy am intrested in all of it i curently have nothing to work with but $6000 spot on will be hard to get out to any one maby we could work out a payment plan :confused: but ir not it all sounds like a great set up and it would be a great start out for a nobish smith to stumble onto
 
Brax said:
i actualy am intrested in all of it i curently have nothing to work with but $6000 spot on will be hard to get out to any one maby we could work out a payment plan :confused: but ir not it all sounds like a great set up and it would be a great start out for a nobish smith to stumble onto
Click to expand...

Just give me a call!
Howard
(956) 566-0131
 
ill give you a call as soon as a phone line opens up dsn phone's are a pain to wait on
 
dang no dsn phones in the Harligen area. Ill get a phone card and call around this time tomerrow. well ill be about 2 hrs ahead of this post so itil be midnight my current time. my folks live down in that area very beutiful place if yo dont mind snow birds:mad:
 
You must log in or register to reply here.
Back
Top