ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,465
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.
For trades, I'm looking for an: MSC XL Yeti, Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, ViKnives, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Jason Clarks, Rassentis, Demkos, some Shirogorovs, Grimsmos, Jason Guthries, Marfione MSG-3, DOC, ZT 0454, and maybe a custom Emerson or Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Sergey Rogovets Model 21 - like new - $1200
Precisely built flipper with 4" of cutting edge
2-tone CTS-XHP blade with satin flats, acidwashed grinds, and a 3-hole pattern milled into the blade
Tumbled bronzed handle slabs with a flame trail pattern
There is a blasted gear decal on either side
The backspacer and back pivot collar are made from copper
Fit and finish is perfect
Lockup is early but rock solid with zero play
Action is drop-shut smooth, detent is dialed in so it's snappy and reliable
The blade is actually centered but the grind is very slightly asymmetrical so it looks like it favors the lock side by a hair
Comes in a huge branded Pelican 1120 case with some extras and a security torx bit for the pivot
2. Allen Elishewitz Silver Fox - near mint - $750
Two-tone damasteel blade with 3.5" of cutting edge
The pattern shows on the edges and grinds, the flats have a hand satin
Scales are made from black G-10, silver twill carbon fiber, and layered blue twill carbon fiber
Custom pivot with polished pivot collars
Blade-to-handle ratio is nearly 1:1
Typical perfect Elishewitz fit and finish, all material transitions are seamless
Blade opens nicely if you pre-load the flipper, thumbstuds work great as well
Smooth action and locks with zero play
Centering favors the show side by just a hair but doesn't come close to rubbing
3. TuffKnives One-Off - near mint - $1000
Well built 3.5" flipper
Geoff packed as much blade as he could into the frame
2-tone blade with satin flats and acidwashed grinds
Lightly orange-peeled and tumbled bronzed to frame
Has some short milled lines on the front
Nicely finished custom pivot
Has some scalloping on the inner edge of the frame
The edge is still sharp but could use a light touchup
Best flipper I've gotten from Geoff, fires open with a nice snap
The opening hole in the blade is usable as well
Centering is dead on and lockup is secure
For trades, I'm looking for an: MSC XL Yeti, Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, ViKnives, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Jason Clarks, Rassentis, Demkos, some Shirogorovs, Grimsmos, Jason Guthries, Marfione MSG-3, DOC, ZT 0454, and maybe a custom Emerson or Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Sergey Rogovets Model 21 - like new - $1200
Precisely built flipper with 4" of cutting edge
2-tone CTS-XHP blade with satin flats, acidwashed grinds, and a 3-hole pattern milled into the blade
Tumbled bronzed handle slabs with a flame trail pattern
There is a blasted gear decal on either side
The backspacer and back pivot collar are made from copper
Fit and finish is perfect
Lockup is early but rock solid with zero play
Action is drop-shut smooth, detent is dialed in so it's snappy and reliable
The blade is actually centered but the grind is very slightly asymmetrical so it looks like it favors the lock side by a hair
Comes in a huge branded Pelican 1120 case with some extras and a security torx bit for the pivot
2. Allen Elishewitz Silver Fox - near mint - $750
Two-tone damasteel blade with 3.5" of cutting edge
The pattern shows on the edges and grinds, the flats have a hand satin
Scales are made from black G-10, silver twill carbon fiber, and layered blue twill carbon fiber
Custom pivot with polished pivot collars
Blade-to-handle ratio is nearly 1:1
Typical perfect Elishewitz fit and finish, all material transitions are seamless
Blade opens nicely if you pre-load the flipper, thumbstuds work great as well
Smooth action and locks with zero play
Centering favors the show side by just a hair but doesn't come close to rubbing
3. TuffKnives One-Off - near mint - $1000
Well built 3.5" flipper
Geoff packed as much blade as he could into the frame
2-tone blade with satin flats and acidwashed grinds
Lightly orange-peeled and tumbled bronzed to frame
Has some short milled lines on the front
Nicely finished custom pivot
Has some scalloping on the inner edge of the frame
The edge is still sharp but could use a light touchup
Best flipper I've gotten from Geoff, fires open with a nice snap
The opening hole in the blade is usable as well
Centering is dead on and lockup is secure