ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,461
If you have any questions about what's here, let me know and I'll do my best to help you out. For more details, specs, or pictures, just ask and I'll get back to you as soon as I can. I don't get notifications for profile messages so PMs or shooting me an email at kenleung1995 at hotmail dot com is the best way to reach me. I also check my threads every once in a while so I'll usually see your posts. I can work with you on the price for some of these and I'm open to trades. If you don't have much feedback or forum history, I might ask you to ship first. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. The knives will come with what's shown unless otherwise stated. Thanks for taking a look.
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Broadwells, Black Snow Customs, VanderMeulens, Chris Goodwyns, Rogovets, Mosiers, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, and maybe a custom Emerson or just Striders in general but I'll always be open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.
1. Sergio Consoli N° 281 - near mint - $1450
Seriously impressive flipper that's handmade by an Italian Knife Guild Maestro
Almost 4" blade with a flawless hand satin
Contoured lightning strike CF scales that have been perfectly polished, I don't feel any wires poking out
Clip is made from lightning strike CF as well and it goes in and out of pocket smoothly
Liners have a satin finish on the inside and are polished on the edges
Full length bronzed ti backspacer that's satin finished on the inside
The top on the backspacer has some faint marks
Polished custom pivot
Blade flies open with a snap and drops when you disengage the lock
Locks with no play at all
2. Jerry Moen Custom Mongoose - like new - $500 --> Traded
3.5" RWL-34 recurve blade with satin flats, mirror polished grinds, and high polished edges
Frame is fully contoured and has a honeycomb pattern
Satin pivot collars
DLC coated inset lockbar
DLC coated gear pattern backspacer
Blind screwed 2-tone clip with a Begg style ceramic ball
Has a snappy detent and it's smooth enough to drop shut
Centering is good and lockup is solid
3. Steve Ryan One-Off - lightly carried - $550
Hands down the thinnest folder I've seen
Blade stock is 0.070" and overall thickness is just 0.280"
2-tone satin blade that measures 3.5"
Flamed and blasted ti frame
Has some light marks on the frame
Since the knife is so thin, the framelock will slip if a lot of force is applied to the spine but it will lock up solid if you put any pressure on the lockbar, like in a normal grip
Smooth action
My angle is a bit off in the photo so it's hard to tell but centering is dead on
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Tashi collabs and customs, GTCs, Sharknivcos, RJ Martins, Dalibors, Broadwells, Black Snow Customs, VanderMeulens, Chris Goodwyns, Rogovets, Mosiers, Guthries, Rotten Designs, ZT 0454, G&G Deadlock, Rockstead Shun, and maybe a custom Emerson or just Striders in general but I'll always be open to other offers. I like seeing what's out there and the worst I can do is pass. Cash can be added either way.
1. Sergio Consoli N° 281 - near mint - $1450
Seriously impressive flipper that's handmade by an Italian Knife Guild Maestro
Almost 4" blade with a flawless hand satin
Contoured lightning strike CF scales that have been perfectly polished, I don't feel any wires poking out
Clip is made from lightning strike CF as well and it goes in and out of pocket smoothly
Liners have a satin finish on the inside and are polished on the edges
Full length bronzed ti backspacer that's satin finished on the inside
The top on the backspacer has some faint marks
Polished custom pivot
Blade flies open with a snap and drops when you disengage the lock
Locks with no play at all
2. Jerry Moen Custom Mongoose - like new - $500 --> Traded
3.5" RWL-34 recurve blade with satin flats, mirror polished grinds, and high polished edges
Frame is fully contoured and has a honeycomb pattern
Satin pivot collars
DLC coated inset lockbar
DLC coated gear pattern backspacer
Blind screwed 2-tone clip with a Begg style ceramic ball
Has a snappy detent and it's smooth enough to drop shut
Centering is good and lockup is solid
3. Steve Ryan One-Off - lightly carried - $550
Hands down the thinnest folder I've seen
Blade stock is 0.070" and overall thickness is just 0.280"
2-tone satin blade that measures 3.5"
Flamed and blasted ti frame
Has some light marks on the frame
Since the knife is so thin, the framelock will slip if a lot of force is applied to the spine but it will lock up solid if you put any pressure on the lockbar, like in a normal grip
Smooth action
My angle is a bit off in the photo so it's hard to tell but centering is dead on
Last edited:
