Bluearcflash
Gold Member
- Joined
- Feb 10, 2014
- Messages
- 747
Cleaning out the safe after a long while. All prices are TYD, PP G&S only please. Having trouble with the pics, so if you would like more pics, I can email or attempt to PM more. There is a possibility that I will not be able to ship Monday, otherwise, the packages will go out in the afternoon after work. All will be USPS small flat rate. I reserve the right to sell/not sell for any reason. First timestamp claim in this thread will take it. I'm not interested in the thread/PM/Email simultaneous claims. Thanks for looking.(Top to bottom, left to right)
1.Benchmade Volli S30V assisted opener. Has a very small chip in the G10 by the pivot, came to me that way. I never carried or used it. Has box and bag. Sold
2.Boker Plus Kwaiken VG10 CF 3.5" blade with "smokewash" finish. Carried one or two days, possibly used once. Locks up around 60%. Factory edge, good flipping action. centering slightly to the clip side. CF right around the pivots could have been done better. Has box. $95
3.Lionsteel Daghetta D2 aluminum scales. Carried and used for about a week. Has some small paint chips on the scales. Has box. Factory edge is decent Sold
4.RAT 1 CF/D2 satin blade. Not carried or used. Locks up around 50%. Has box. $50
5.RAT 1 CF/D2 black blade. Not carried or used. Locks up around 50%. Has box. $50
6.RAT 2 CF/D2 satin blade. Carried and used about a month. Clip shows wear and there are a few scratches from use. Locks up around 70%. Has box. SOLD
7.Mora Garberg Multimount. Never used or carried. Out of the box to check out and then to take pics, just not for me. Box came a little beat up. $70
8.ZT 0909 Never used or carried. A little too big for my EDC. Early lockup, strong detent. Has box. I paid $120 for it Sold
9.ZT 0551 I believe its a Gen1, maybe 2. Possibly used very little by first owner, I never carried or used it. Looks like the pivot was adjusted at some point, not damaged though. Centering slightly to the clip side. Factory edge is good. 25-30% lockup. No box $150
10.ZT 0095BW Carried and used very little. Factory edge is good. Flips as good as any ZT I've had. Has some very small scratches in the finish on the scales and upper blade flats. Lockup around 50%, centered well. No box. Sold
1.Benchmade Volli S30V assisted opener. Has a very small chip in the G10 by the pivot, came to me that way. I never carried or used it. Has box and bag. Sold
2.Boker Plus Kwaiken VG10 CF 3.5" blade with "smokewash" finish. Carried one or two days, possibly used once. Locks up around 60%. Factory edge, good flipping action. centering slightly to the clip side. CF right around the pivots could have been done better. Has box. $95
3.Lionsteel Daghetta D2 aluminum scales. Carried and used for about a week. Has some small paint chips on the scales. Has box. Factory edge is decent Sold
4.RAT 1 CF/D2 satin blade. Not carried or used. Locks up around 50%. Has box. $50
5.RAT 1 CF/D2 black blade. Not carried or used. Locks up around 50%. Has box. $50
6.RAT 2 CF/D2 satin blade. Carried and used about a month. Clip shows wear and there are a few scratches from use. Locks up around 70%. Has box. SOLD
7.Mora Garberg Multimount. Never used or carried. Out of the box to check out and then to take pics, just not for me. Box came a little beat up. $70
8.ZT 0909 Never used or carried. A little too big for my EDC. Early lockup, strong detent. Has box. I paid $120 for it Sold
9.ZT 0551 I believe its a Gen1, maybe 2. Possibly used very little by first owner, I never carried or used it. Looks like the pivot was adjusted at some point, not damaged though. Centering slightly to the clip side. Factory edge is good. 25-30% lockup. No box $150
10.ZT 0095BW Carried and used very little. Factory edge is good. Flips as good as any ZT I've had. Has some very small scratches in the finish on the scales and upper blade flats. Lockup around 50%, centered well. No box. Sold
Last edited:
