Several for Sale today (all sizes) All O-1 steel(3 more added, post 13)

R

rwn2000

Feedback: +12 / =0 / -0
Joined
Jan 6, 2003
Messages
716
I've finished up several knives this week and will be posting 5 or 6 in this thread throughout the day. Check back later for more knives.

First up is two Mini-bush neck knives. The green one is 6" OAL, 3" blade, 1/8" O-1 hand sanded to 400 grit and etched in ferric chloride, 3 color green G-10 scales with white liners, stainless hardware, hot waxed leather neck sheath, $55 shipped CONUS.SPF
The orange/black one is 6 3/4" OAL, 3 1/2" blade, 1/8" O-1 hand sanded to 400 grit, black and orange G-10 scales with black liners, stainless hardware, hot waxed leather neck/belt sheath. $65 shipped CONUS SPF.

IMGP1258.jpg

IMGP1259.jpg

IMGP1257.jpg


Both knives are heat treated by me in a propane forge and triple tempered and feature flat grinds with secondary bevels. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net.

Thanks for looking, please email or PM if you have any questions.

randy
 
Last edited:
Next up is an O-1 Spear point with cord wrapped handle. It is 9" OAL, with a 5" blade(tip to handle) of 5/32" O-1. Blade is a flat grind, sanded to 800 grit, forge finish on the flats, etched in ferric chloride. For the handle, I glued a piece of leather to each side, and wrapped it with coyote tan paracord, with a "guard" wrap of desert camo paracord and soaked the paracord with Zap thin CA glue. The sheath is 8-9oz leather wet-formed and hot waxed with a belt loop. This would make a good camp.bushcraft knife and is shaving sharp (flat grind, secondary bevel)
IMGP1261.jpg

IMGP1260.jpg


Price on this one is $85 shipped. (SOLD)
This knife is heat treated by me in a propane forge and triple tempered.. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net.

Thanks for looking, please email or PM if you have any questions.

randy
 
Last edited:
Next up is another Spear point blade with a cord wrapped handle. This one is 9 1/2" OAL, 5" blade (tip to handle), 5/32" O-1, full flat grind, sanded to 800 grit, etched in ferric chloride. The handle on this one is full coyote tan paracord over leather with a gutted desert camo paracord wrap with a grey "guard" of paracord. It was then saturated with Zap thin CA glue to make a monolithic handle. The sheath is 0.060 kydex and wrapped with about 10' of paracord. The sheath has a removable kydex belt look and could be drilled for a Tek-Lok (not included) very easily. This knife is shaving sharp and would make a good woods/bushcraft/survival blade.

IMGP1262.jpg

IMGP1263.jpg

IMGP1264.jpg


Price on this one is $85 shipped. Sold pending funds
This knife is heat treated by me in a propane forge and triple tempered.. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net.

Thanks for looking, please email or PM if you have any questions.

randy
 
Last edited:
The green one is 6" OAL, 3" blade, 1/8" O-1 hand sanded to 400 grit and etched in ferric chloride, 3 color green G-10 scales with white liners, stainless hardware, hot waxed leather neck sheath, $55 shipped
If a postal MO is good for payment on this one I'll take it.
 
"Both knives are heat treated by me in a propane forge and triple tempered and feature flat grinds with secondary bevels. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net. "
 
nick, PayPal received, will ship on Monday. Thanks for your business.

fishiker, Yes, I will take a USPS money order and ship when I receive it.

thanks.
 
Here is a little EDC in 5/32" O-1. full flat grind, sanded to 400 grit. (6 1/2" OAL, 3 1/4" blade). Handle from the ricasso is brass, brown G-10, Black G-10, elk Antler, bocote pommel with two brass pins. Entire handle was soaked in Watco Danish oil to seal everything up. Comes with a hot waxed leather sheath with neck/belt loop. $55 Shipped.

IMGP1265.jpg

IMGP1266.jpg


This knife is heat treated by me in a propane forge and triple tempered.. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net.

Thanks for looking, please email or PM if you have any questions.

randy
 
This is my first forged blade for sale. It is 8" OAL, 3 3/4" cutting edge from 1.8" O-1. Forged finish at the spine, convex edge sanded to 1500 grit with forced mustard patina. Blade was normalized 3 times after forging and then heat treated by me in a propane forge. The handle is green jute twine over a leather wrap and soaked with 1 hour epoxy. Belt sheath is tooled leather and has been hot waxed. Price is $65 shipped.
IMGP1267.jpg

IMGP1268.jpg


This knife is heat treated by me in a propane forge and triple tempered.. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net.

Thanks for looking, please email or PM if you have any questions.

randy
 
Next up is a combat bowie in 5/32" O-1 with textured 3-color green G-10 scales and stainless tubing. It is 10" OAL, with a 5" blade, tip to scales. Blade is flat ground,, sanded to 800 grit, and etched with a combination of ferric chloride, cold blue, and bleach. The sheath is 0.060 kydex with a removable belt loop and could be drilled for a Tek_lok if needed. This is a working knife with a working edge, but still shaving sharp. The sheath WILL scratch/rub the etched finished but can be touched up as needed with cold blue or vinegar.
IMGP1269.jpg

IMGP1270.jpg


Price on this knife is $100 shipped CONUS. This knife is heat treated by me in a propane forge and triple tempered.. PayPal is preferred but i will also accept a USPS money order. International shipping is available at additional cost and buyer assumes responsibility for the package once it leaves the USPS. My PayPal address is rwnance@vnet.net.

Thanks for looking, please email or PM if you have any questions.

randy
 
I just got the orange and black mini bush necker in the mail today! It came wrapped in a piece of digital camo cloth tied with jute rope. The edge is very nice and looks like it I going to be a feather stick machine. It has a nice leather sheath that looks like it could be used on a belt or lanyard around the neck. I'm pumped and I can't wait to bring it out in the woods! thank you very much Randy!
 
You must log in or register to reply here.
Back
Top