ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,458
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Jim Burkes, Blackwoods, VanderMeulens, Chris Goodwyns, Rogovets, Jason Clarks, Grimsmos, Brown Knives, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Sharknivco M11 - lightly carried and used - $1000
Well built and well designed like you'd expect from Edison
3.25" CPM-S35VN reverse tanto blade
Working finish blade and frame
Contoured frame
The blade sits almost flush with the back of the frame but the tip is still well covered
Has a custom pivot and a pivot collar on the back
Has been carried and used but the finishes help to hide the wear, it's most noticeable on the clip
Runs smooth on bearings and has a great detent
Centering is dead on and it locks with zero play
2. Grimsmo Norseman - like new in case - $1000
Never carried or used
One of the newer ones with the detent ramp
Stonewashed RWL-34 blade
Stonewashed and purple anodized frame and clip
Honeycomb pattern frame
Green anodized screws, standoffs, thumbstud, and lockbar stabilizer
Fit and finish is perfect
Perfect centering, locks up tight, and has that famous drop-shut action
3. Enrique Pena Dingo - carried - $700
Extremely well built 3.25" flipper
Hand satin blade
Lightly bronzed ti frame that's been fully contoured, blasted, and tumbled
15 holes on the front, 5 on that back that match up with the top row on the front, and each hole has a polished edge
2-tone blue pivot with satin highs
Blue anodized pivot collars, screws, and backspacer
Has been carried much more than it's been used so it still has a the original edge
There are some light scratches on the blade and a number of snail trails on the frame
Action is fast, snappy, and 100% reliable
Locks with no play and centering is dead on
For trades, I'm looking for: Jon Grahams, Ochs Worx, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Jim Burkes, Blackwoods, VanderMeulens, Chris Goodwyns, Rogovets, Jason Clarks, Grimsmos, Brown Knives, Jason Guthries, ZT 0454, CKF Terra, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Sharknivco M11 - lightly carried and used - $1000
Well built and well designed like you'd expect from Edison
3.25" CPM-S35VN reverse tanto blade
Working finish blade and frame
Contoured frame
The blade sits almost flush with the back of the frame but the tip is still well covered
Has a custom pivot and a pivot collar on the back
Has been carried and used but the finishes help to hide the wear, it's most noticeable on the clip
Runs smooth on bearings and has a great detent
Centering is dead on and it locks with zero play






2. Grimsmo Norseman - like new in case - $1000
Never carried or used
One of the newer ones with the detent ramp
Stonewashed RWL-34 blade
Stonewashed and purple anodized frame and clip
Honeycomb pattern frame
Green anodized screws, standoffs, thumbstud, and lockbar stabilizer
Fit and finish is perfect
Perfect centering, locks up tight, and has that famous drop-shut action







3. Enrique Pena Dingo - carried - $700
Extremely well built 3.25" flipper
Hand satin blade
Lightly bronzed ti frame that's been fully contoured, blasted, and tumbled
15 holes on the front, 5 on that back that match up with the top row on the front, and each hole has a polished edge
2-tone blue pivot with satin highs
Blue anodized pivot collars, screws, and backspacer
Has been carried much more than it's been used so it still has a the original edge
There are some light scratches on the blade and a number of snail trails on the frame
Action is fast, snappy, and 100% reliable
Locks with no play and centering is dead on





