ShadyMethods
Platinum Member
- Joined
- Apr 9, 2016
- Messages
- 3,465
If you have any questions about what's listed, just let me know and I'll do my best to help you out. For more details, specs, or pictures, ask and ye shall receive. You can reach me through private message or through my email: kenleung1995 at hotmail dot com. I also check my threads fairly often so I'll see your posts. I can work with you on the price for some of these and I'm open to trades. Prices include all shipping and PayPal fees in the US. I'll be happy to ship international but the buyer will need to assume all risks and help cover the cost of shipping. Thanks for your time.
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Shirogorov Hati - brand new in box - $750
Stonewashed Elmax blade
Lightly textured and milled carbon fiber show side that shimmers in the light
Stonewashed ti lockside and backspacer
Runs on washers but will out-flip most bearing knives
Locks up solid and centering is perfect
Come with the box, cloth, paperwork, and even still has the sticker on the pivot
2. Jake Hoback Custom A10 - like new - $800
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame had been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on
3. Steve Ryan MLC - brand new - $800
2-tone polished satin CPM-S35VN blade that measures 3.5"
Stonewashed ti frame with a polished satin on the highs
Steve's flame anodizing gives it a reflective oil slick look
Monkey Edge frag pattern splash milling on the front and a frag pattern stripe milled onto the back
Great in hand, close to an XM-18 3.5
The knife returned from Steve not too long ago so it's basically brand new
There is lockslip if there is no pressure on the lockbar but I think it'll go away once the knife breaks in
The blade is centered but the grind is asymmetrical at the tip so it looks like it's off to the front side
Action is glass smooth and works as both a flipper and thumbstud opener
For trades, I'm looking for: Jon Grahams, Yunas, Marlowes, Direwares, GTCs, TuffKnives, Sharknivcos, RJ Martins, Rocksteads, Dalibors, Broadwells, Black Snow Customs, Phantom Steelworks, Kirby Lamberts, Jim Burkes, Ochs, Blackwoods, VanderMeulens, Goodwyns, Rogovets, Jason Clarks, Rassentis, some Shirogorovs, Grimsmos, Brown Knives Servo, Jason Guthries, ZT 0454, and maybe a custom Emerson or just Striders in general but if you have other offers, I'm happy to hear them. Cash can be added either way.
1. Shirogorov Hati - brand new in box - $750
Stonewashed Elmax blade
Lightly textured and milled carbon fiber show side that shimmers in the light
Stonewashed ti lockside and backspacer
Runs on washers but will out-flip most bearing knives
Locks up solid and centering is perfect
Come with the box, cloth, paperwork, and even still has the sticker on the pivot
2. Jake Hoback Custom A10 - like new - $800
Early full custom from Jake
Acidwashed CPM-154 blade that's thinner stock than what you'd normally find on a Hoback
The ti frame had been sand blasted, the flats were given a satin, and then it was tumbled
Milled lines on both sides of the frame
Raised carbon fiber backspacer
Opens nicely with both the flipper and thumbstuds
There a bit of blade play but lockup is 100% secure and won't close on you
Centering is dead on
3. Steve Ryan MLC - brand new - $800
2-tone polished satin CPM-S35VN blade that measures 3.5"
Stonewashed ti frame with a polished satin on the highs
Steve's flame anodizing gives it a reflective oil slick look
Monkey Edge frag pattern splash milling on the front and a frag pattern stripe milled onto the back
Great in hand, close to an XM-18 3.5
The knife returned from Steve not too long ago so it's basically brand new
There is lockslip if there is no pressure on the lockbar but I think it'll go away once the knife breaks in
The blade is centered but the grind is asymmetrical at the tip so it looks like it's off to the front side
Action is glass smooth and works as both a flipper and thumbstud opener