All reposts, and most of which been sitting around the shop for awhile. Collecting dust, rust, dings & things. But are all perfectly fine cutting tools.
First I'll Take It, its yours.
PAYPAL to sarabonifas@yahoo.com, I also accept money orders and cashiers checks.
CONTACT ME at colu41 @ gmail
Going to try to go from top to bottom.
#1
1/4" W2
Triple normalized. Hardened to 60-61rc
8 1/2" Cutting edge, 14 1/4" OAL
Armor black cerakote blade (slight imperfections in the coating, but still solid)
416 stainless accessories, with red stabilized spalted maple burl.
Some scratching under the lug.
9oz leather sheath with spike.
SOLD shipped to the 50 states.
#2
Light Chopper
1/4" 52100
Triple Normalized
Hardened to 58rc
8 1/2" cutting edge
Just over 13 1/2" Oal
Hammer finished flats with 120 grit grind, as this is will be a user. Tang & Spine were blued. Black G10 spacers with natural canvas micarta. With brass corby fasteners.
I've put this knife to the test on a 4" wide cherry log. Cut it decent, and the edge was fine. I'm actually quite pleased with it.
Comes with a CF Holstex sheath. Large Tek Lok compatible.
Asking SOLD shipped to the 50 states.
#3
(2) Small Utility/Hunters
3/16" 1095
Triple Normalized
Hardened to 60rc.
3" cutting edge with a 6 1/4" Oal
Hammer finished flats, with blued tang and spine.
Both feature my awesome "unknown" burl scales. This is the last of these that I have, still have not found out what they are, but they are nice. Hopefully can pick some more up Soon.
Does not include sheath for either of them.
Both SOLD
#4
.156 CPM154
60rc with sub zero treatment
Just under 4" Blade, 9 3/8" OAL
Tapered spine, 416 stainless guard and corbys.
OD Green G10 handles.
Again, some flaws in this one also. Between the visible grind lines and the guard transition underneath the spine. Still a beautiful, working knife.
Leather sheath with belt loop.
Asking only SOLD shipped to the 50 states.
#5
Hidden Tang Hunter
.170" 1095
Triple Normalized
Hardened to 60rc
4 1/4" from tip to guard
Just under 9 1/4" Oal
Stainless guard & pin. Linen Micarta Handle
Blade and guard are polished. Bevel does show some grind lines under the polish. Otherwise looks great!
Leather sheath with belt loop.
Asking SOLDshipped to the 50 states.
First I'll Take It, its yours.
PAYPAL to sarabonifas@yahoo.com, I also accept money orders and cashiers checks.
CONTACT ME at colu41 @ gmail
Going to try to go from top to bottom.
#1
1/4" W2
Triple normalized. Hardened to 60-61rc
8 1/2" Cutting edge, 14 1/4" OAL
Armor black cerakote blade (slight imperfections in the coating, but still solid)
416 stainless accessories, with red stabilized spalted maple burl.
Some scratching under the lug.
9oz leather sheath with spike.
SOLD shipped to the 50 states.
#2
Light Chopper
1/4" 52100
Triple Normalized
Hardened to 58rc
8 1/2" cutting edge
Just over 13 1/2" Oal
Hammer finished flats with 120 grit grind, as this is will be a user. Tang & Spine were blued. Black G10 spacers with natural canvas micarta. With brass corby fasteners.
I've put this knife to the test on a 4" wide cherry log. Cut it decent, and the edge was fine. I'm actually quite pleased with it.
Comes with a CF Holstex sheath. Large Tek Lok compatible.
Asking SOLD shipped to the 50 states.
#3
(2) Small Utility/Hunters
3/16" 1095
Triple Normalized
Hardened to 60rc.
3" cutting edge with a 6 1/4" Oal
Hammer finished flats, with blued tang and spine.
Both feature my awesome "unknown" burl scales. This is the last of these that I have, still have not found out what they are, but they are nice. Hopefully can pick some more up Soon.
Does not include sheath for either of them.
Both SOLD
#4
.156 CPM154
60rc with sub zero treatment
Just under 4" Blade, 9 3/8" OAL
Tapered spine, 416 stainless guard and corbys.
OD Green G10 handles.
Again, some flaws in this one also. Between the visible grind lines and the guard transition underneath the spine. Still a beautiful, working knife.
Leather sheath with belt loop.
Asking only SOLD shipped to the 50 states.
#5
Hidden Tang Hunter
.170" 1095
Triple Normalized
Hardened to 60rc
4 1/4" from tip to guard
Just under 9 1/4" Oal
Stainless guard & pin. Linen Micarta Handle
Blade and guard are polished. Bevel does show some grind lines under the polish. Otherwise looks great!
Leather sheath with belt loop.
Asking SOLDshipped to the 50 states.
Last edited:
