- Joined
- Jan 18, 2007
- Messages
- 1,976
1095 steel Triple tempered and sub-zero quenched.
7 5/8" overall length
3 1/8" cutting edge
4 1/4: handle
1 1/4" wide
1/8" thick
These have a high flat grind going to a very thin edge, and a small secondary convex bevel.
They come with a sheath. My sheath is designed to be ether right or left handed, and has a loop for a 1/4" fire steel.
This knife is cross grain zebra wood with black and red liners. The wood I use for my knife handles has been seasoned for a few years in our dry California environment, then I use 5 coats of and rubbed linseed oil/varnish mix.
Thanks for looking
7 5/8" overall length
3 1/8" cutting edge
4 1/4: handle
1 1/4" wide
1/8" thick
These have a high flat grind going to a very thin edge, and a small secondary convex bevel.
They come with a sheath. My sheath is designed to be ether right or left handed, and has a loop for a 1/4" fire steel.
This knife is cross grain zebra wood with black and red liners. The wood I use for my knife handles has been seasoned for a few years in our dry California environment, then I use 5 coats of and rubbed linseed oil/varnish mix.
Thanks for looking
Last edited: