Very short, fat knife.
OAL: 5 1/2 inches
Blade: 2 1/2 inches
Handle: Ash
Blade is 1080 steel, full quench and temper, 1/8 inch thick. High taper grind, convex, with a stropped finish. Finish on the blade flats is forge finish rubbed down to 600 grit. Thumb ramp has an increasing curve towards the front for a little extra stoppage on the ball of the thumb.
Handle is 7/8 inch thick, 3/4 to 1 1/8 broad, well rounded. Handle material is ash crotch wood, linseed oil soaked with a briwax finish on top. Pins are 1/4 inch brass.
Sheath is a Ranger style pouch model, with the belt loop attached to the horizontal strap, no stitching through the sheath body.
SOLD Asking $155,
Thanks for looking!
OAL: 5 1/2 inches
Blade: 2 1/2 inches
Handle: Ash
Blade is 1080 steel, full quench and temper, 1/8 inch thick. High taper grind, convex, with a stropped finish. Finish on the blade flats is forge finish rubbed down to 600 grit. Thumb ramp has an increasing curve towards the front for a little extra stoppage on the ball of the thumb.
Handle is 7/8 inch thick, 3/4 to 1 1/8 broad, well rounded. Handle material is ash crotch wood, linseed oil soaked with a briwax finish on top. Pins are 1/4 inch brass.
Sheath is a Ranger style pouch model, with the belt loop attached to the horizontal strap, no stitching through the sheath body.
SOLD Asking $155,
Thanks for looking!
Last edited:
HAve to make more, once I'm done with the stead knives, and the moving thing