shrikes, slim finn EDC, PSK.

[koyote]

4 knives up just in time for Christmas With BF price discounts!

This is an EDC / bird and trout knife with a distal taper. Grind is a tapered sabre grind with a standard edge bevel. It's been differentially heat treated.

Blade length: 3.25 inch (3 inches from the front of the notch)
Overall length: 7.25 inches
Steel: 15N20
Thickness: 3/32 inches

Handle: figured English walnut
Sheath: Ranger model, fully water-formed, double needle hand-stitched, dyed mahogany.

Price: $135 plus $10 shipping including insurance SOLD

This is an EDC / bird and trout knife with a distal taper. Grind is a tapered sabre grind with a standard edge bevel. It's been differentially heat treated.

Blade length: 3 3/4 inches
Overall length: 7 7/8 inches
Steel: 15N20
Thickness: 3/32 inches

Handle: Purpleheart wood

Price: $115 plus $10 shipping including insurance via USPS Priority Mail. Paypal, Money order, checks all good

 

[koyote]

This is a slim finn. I dropped the spine a touch near the
tip for a different point profile. Very handy EDC, about the same size and sheath design as my maple EDC.

Overall, this is 6 1/8 inches long. Edge rolls out to 2 5/8
inches. 15N20, .095 thick, differential heat treat. Convex grind on
this one, with a good rustic overall finish.

Handle scales are 3 1/4 inches long, lacewood, with peened brass pins.

The sheath on this one is a Koyote Girl Ranger style, with a firesteel loop. (I can add a firesteel for $15, with small lacewood handle.)

$90, $5 shipping, SOLD

Medium PSK
Differentially heat treated blade and a tapered convex grind with a slight swedge on the spearpoint.

Blade length: 3 inches
Overall length: 6.25 inches
Steel: 15N20
Thickness: .095 inches

Sheath: Combination neck or belt sheath, sized to fit a 2 inch or smaller belt width.

Price: $40 plus $5 shipping, SOLD

 

[blopez50]

Ill take the PSK. Sending PM now

Thanks!

 

[koyote]

reply incoming

 

[busterbones]

I'll take the slim finn if still availiable

 

[koyote]

PM incoming for you, thanks!

 

[AlexN]

I'll send a PM as well. Thanks.
AlexN

 

[koyote]

PM incoming