PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 469
$225 + 12 CONUS Shipping
click here to view / order
model: Single Barrel
grind: scandi
serial: 22
blade length: 3 3/4″
overall length: 8″
steel: 1/8″ 80CrV2 @ 61 Hc
handle: Red Heart over black G10
hardware: copper pins and tube
origin: Hand Made in Rocky Face, GA USA
sheath: includes FDE kydex sheath. Belt attachments are available
I've been producing PL knives for the past 8 years. I've done leather work for over 20 and kydex for 5 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a multi-stage normalization before being heated to austenitic temperature and quenched in Parks quench oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is approx. 61-62 hc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
click here to view / order
model: Single Barrel
grind: scandi
serial: 22
blade length: 3 3/4″
overall length: 8″
steel: 1/8″ 80CrV2 @ 61 Hc
handle: Red Heart over black G10
hardware: copper pins and tube
origin: Hand Made in Rocky Face, GA USA
sheath: includes FDE kydex sheath. Belt attachments are available
I've been producing PL knives for the past 8 years. I've done leather work for over 20 and kydex for 5 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a multi-stage normalization before being heated to austenitic temperature and quenched in Parks quench oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is approx. 61-62 hc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
