Small Batch Run of MagnaCut/O1 Frame Locks *SOLD OUT*

JRB Blades

JRB Blades

Knifemaker / Craftsman / Service Provider
Feedback: +7 / =0 / -0
Joined
Jul 22, 2013
Messages
266
Finally finished the small batch of frame locks I have been working on. If you aren't familiar with them, I have a build thread over in the "Knifemakers Discussion Forums" section. There are 6 total for sale. 3 of them have the MagnaCut blades and the other 3 are O1 tool steel blades. All the blades have been acid etched and stonewashed. The MagnaCut blades were heat treated to 63.5 HRC and I have the certificate that shows this. All of the handle scales are Titanium. All of the hardware is titanium that has been anodized. They are all running on Skiff bearings. They all have hidden stop pin tracks. All of the lock faces have been carbidized. Take a look at the pictures here and let me know if you have any questions. One of them (#4) that hassome centering issues, but it doesn't affect the action of the knife. PPFF for payments please.

Knives #1, #3, and #4 are the Gator Model with O1 blades blades. They are priced at $250 each.
Knife #2 is the Gator Model with the MagnaCut blade. It is priced at $300.

KNIFE #2 HAS SOLD
KNIFE #1 HAS SOLD
KNIFE #3 HAS SOLD

**I know O1 isn't as highly desirable as the MagnaCut Steel, so if anyone is interested in an awesome little EDC, I'll let #3 go for $200, and since #4 has some centering issues, I'll let it go for $180. Thanks!

IMG_9255.jpgIMG_9257.jpgIMG_9258.jpgIMG_9259.jpgIMG_9260.jpgIMG_9261.jpgIMG_9263.jpgIMG_9264.jpgIMG_9265.jpgIMG_9266.jpg
 
Last edited:
Dawkind said:
May I ask the dimensions of these, please?
Click to expand...

Sure. The group of 4 Gator models are about 7 3/4" OAL with a 3 1/4" blade. The group of 3 Fighter models are 8 3/4" OAL with a 3 3/4" blade length. Thanks!
 
I think the action is pretty darn good. From the feedback I have received from the people who bought it, they agree. I am working on the next batch now. Hoping to have them done around the middle/end of July. I'll be sure to post here when available. Working on 7 of them, however I have several people on the wait list so not sure how many will be available, but will post here when they are. Thanks for the interest!
 
JRB Blades said:
I think the action is pretty darn good. From the feedback I have received from the people who bought it, they agree. I am working on the next batch now. Hoping to have them done around the middle/end of July. I'll be sure to post here when available. Working on 7 of them, however I have several people on the wait list so not sure how many will be available, but will post here when they are. Thanks for the interest!
Click to expand...
Would you say drop shut, or more of a CRK action? Someone should upload videos. Hopefully I can grab one when they're available!
 
Ef150guy said:
Would you say drop shut, or more of a CRK action? Someone should upload videos. Hopefully I can grab one when they're available!
Click to expand...

I have some videos on my IG page @jrbblades of the action, look for the posts that have the tuperware containers with the red lid. I wouldn't say drop shut. You can get them to shut by themselves if you bounce the knife a few times (if that makes sense). I can make them drop shut, but I don't prefer that myself (but I'm not buying them!!). I like a little bit of a tighter action if that makes sense.
 
JRB Blades said:
I have some videos on my IG page @jrbblades of the action, look for the posts that have the tuperware containers with the red lid. I wouldn't say drop shut. You can get them to shut by themselves if you bounce the knife a few times (if that makes sense). I can make them drop shut, but I don't prefer that myself (but I'm not buying them!!). I like a little bit of a tighter action if that makes sense.
Click to expand...
I'll check your page out now! I'm a drop shut guy personally. More fidgety and makes me want to use it more if that makes sense haha
 
You must log in or register to reply here.
Back
Top