- Joined
- Aug 26, 2011
- Messages
- 1,007
I'm looking to sell several of my remaining knives to raise some funds for the holidays. Most of these knives are new/unused or like new. All knives will be shipped with tracking/delivery conformation and if you want insurance $1 please add to the shipping cost(not using it is at your own risk) as I'm already doing slightly cheaper flat rates(even for the insurance)
**I AM LOOKING TO TRADE MY NEW ESEE 4 FOR A BECKER BK15**
Here's the list-
1. BRT Bladeworks(Ben Tendick) 9" blade Chopper(new/never used), 1/8" 5160 steel with 'rough forged' finish with 'horse stall mat' rubber scales(feels great in the hand), kydex sheath with tek-lok. It didn't come very sharp and my attempt to sharpen it was a fail as it was my first chopper and i only had a cheap hand held sharpener but its still decently sharp though. I opted for 5/32" thickness to make it lighter and able to use for longer amounts of time...too bad i never got too do so,lol.
Price-$250-Now $200+$10 s/h (conus)
2. ESEE 4 brand new, never used with kydex sheath. Its the desert tan w/ micarta version with black kydex sheath.
Price-$80-Now $75+$6 s/h (conus)
3. Matt Caldwell 1-5 Brand New/Unused Drop point 5" blade 154cm w/ stonewashed finish and coyote brown micarta scales and tan kydex sheath w/ tek-lok. This knife is perfect in the hand. These were limited to 250 and were made between 2008-2012(I believe).
Price-$210-Now $170+$6 s/h (conus)
4. SOLD-Fiddleback Forge machete like new, 14" blade with od green micarta scales and leather sheath. The blade has a spot or two that came on it(these machetes have little 'imperfections'), its very sharp and was used only once to split a hunk of 2x4. I've kept it oiled as best i could but as a carbon steel thats 7 yrs old it does have some very small rust spots on the spine mainly.
Price-$110+$15 S/h (conus)-
5. SOLD-BK&T BK-9(customized) This one is used and has a broken tip but I know that Beckerheads love to mod their blades so this can be easily reground to a tip or as I've seen several times, the blade and be reground to a more bowie style slanted clip point. but this was stripped and given a forced patina with a tribal type design. Its been oiled a couple times over the years and was used to chop kindling a few times from '11-'13, but has mostly sat untouched since. Comes w/ standard cordura/nylon sheath but has an extra hidden neck knife/dagger hidden behind the pocket that could double as a crude sprear tip in a bind.
Price-$40+$10s/h (conus)-
6. SOLD-Cheap-o bundle: Condor Knife & Tool Hudson Bay camp knife, Condor Bushcraft Basic 5", Condor Varan 8" blade and Linder 10" Machete. None of these have been used but the blades are all marked up from numerous attempts with stones and different handheld sharpeners...yet none actually got any sharper, smh. I think when it comes to the 1075 these are made from, you just gotta use a belt sharpener like the worksharp. So these are used looking and dull but half the time condor knives look like that anyway, lol. If you're unlike me and are actually good at sharpening and want some inexpensive knock around knives then here you go.
Price-$50+$20s/h (shipping is high cuz of the size/weight of most of these).
7. Becker/Ritter-Bk12/RSk MKII 'Perseverence' w/ OD green micarta scales. Like New, used once to open 2 boxes and lightly sharpened with a super fine sharpener.
Price-$125-Now $110+$8 s/h (conus)
**I AM LOOKING TO TRADE MY NEW ESEE 4 FOR A BECKER BK15**
Here's the list-
1. BRT Bladeworks(Ben Tendick) 9" blade Chopper(new/never used), 1/8" 5160 steel with 'rough forged' finish with 'horse stall mat' rubber scales(feels great in the hand), kydex sheath with tek-lok. It didn't come very sharp and my attempt to sharpen it was a fail as it was my first chopper and i only had a cheap hand held sharpener but its still decently sharp though. I opted for 5/32" thickness to make it lighter and able to use for longer amounts of time...too bad i never got too do so,lol.
Price-$250-Now $200+$10 s/h (conus)
2. ESEE 4 brand new, never used with kydex sheath. Its the desert tan w/ micarta version with black kydex sheath.
Price-$80-Now $75+$6 s/h (conus)
3. Matt Caldwell 1-5 Brand New/Unused Drop point 5" blade 154cm w/ stonewashed finish and coyote brown micarta scales and tan kydex sheath w/ tek-lok. This knife is perfect in the hand. These were limited to 250 and were made between 2008-2012(I believe).
Price-$210-Now $170+$6 s/h (conus)
4. SOLD-Fiddleback Forge machete like new, 14" blade with od green micarta scales and leather sheath. The blade has a spot or two that came on it(these machetes have little 'imperfections'), its very sharp and was used only once to split a hunk of 2x4. I've kept it oiled as best i could but as a carbon steel thats 7 yrs old it does have some very small rust spots on the spine mainly.
Price-$110+$15 S/h (conus)-
5. SOLD-BK&T BK-9(customized) This one is used and has a broken tip but I know that Beckerheads love to mod their blades so this can be easily reground to a tip or as I've seen several times, the blade and be reground to a more bowie style slanted clip point. but this was stripped and given a forced patina with a tribal type design. Its been oiled a couple times over the years and was used to chop kindling a few times from '11-'13, but has mostly sat untouched since. Comes w/ standard cordura/nylon sheath but has an extra hidden neck knife/dagger hidden behind the pocket that could double as a crude sprear tip in a bind.
Price-$40+$10s/h (conus)-
6. SOLD-Cheap-o bundle: Condor Knife & Tool Hudson Bay camp knife, Condor Bushcraft Basic 5", Condor Varan 8" blade and Linder 10" Machete. None of these have been used but the blades are all marked up from numerous attempts with stones and different handheld sharpeners...yet none actually got any sharper, smh. I think when it comes to the 1075 these are made from, you just gotta use a belt sharpener like the worksharp. So these are used looking and dull but half the time condor knives look like that anyway, lol. If you're unlike me and are actually good at sharpening and want some inexpensive knock around knives then here you go.
Price-$50+$20s/h (shipping is high cuz of the size/weight of most of these).
7. Becker/Ritter-Bk12/RSk MKII 'Perseverence' w/ OD green micarta scales. Like New, used once to open 2 boxes and lightly sharpened with a super fine sharpener.
Price-$125-Now $110+$8 s/h (conus)
Attachments
Last edited:
