Hallelujah! I'm finally getting one of these suckers up for sale! This design was initially intended to be used for a set of steak knives, but seeing it ground out, I feel like it is better suited for the field as a nice Bird and Trout. The Snakewood I used for the handles have been drying for several months just wanting to be used. Alas, here She is in all her glory! 
Blade Steel- 1084 from NJ Steel Barron
Hardness- Around 56-57 RC
Edge thickness- .015" (+/-)
Handles- Snakewood with one 1/8" pin and one 1/4" tube (both stainless). I used West Systems G-Flex epoxy between the tang and scales.
Grind- Full flat, Hand sanded to 400 grit
OAL- 7 3/16"
Blade length- 3 1/4"
The Sheath is made of Vegetable Tanned leather (6-7 oz) dyed dark brown.
Price is $180 shipped Prioroty Mail (CONUS)
Let me know if you want more pictures. Also let me know if I missed any information.
First to say "I'll Take It" gets it.
Blade Steel- 1084 from NJ Steel Barron
Hardness- Around 56-57 RC
Edge thickness- .015" (+/-)
Handles- Snakewood with one 1/8" pin and one 1/4" tube (both stainless). I used West Systems G-Flex epoxy between the tang and scales.
Grind- Full flat, Hand sanded to 400 grit
OAL- 7 3/16"
Blade length- 3 1/4"
The Sheath is made of Vegetable Tanned leather (6-7 oz) dyed dark brown.
Price is $180 shipped Prioroty Mail (CONUS)
Let me know if you want more pictures. Also let me know if I missed any information.
First to say "I'll Take It" gets it.