So I fell in love

[Joshd24]

It's been a great experience so far !!!

Josh, Welcome! Good for you goin' gold right out of the gate and supporting one of the... no, the greatest and largest knife forum on the internet. I've been here a long time, even before there was a blade forums when it was a collection of bulletin board knife knuts who got together on the internet at night and talked about knives and a lot of other unrelated things but there was always a picture of a knife or a comment about a blade. We've got the makers and the shakers here. We've got more custom makers, blade smiths and owners and reps from most of the major manufacturers. Blade smiths and grinder jockeys from novice to master smith like to put their feet up here and help out anyway they can so you'll never be at a loss for resources, expert advice (snd some dumb advice sprinkled in there too

There's ton's of functions and customability available to tailor forum experience to insure a great experience each time you log in. One thing's always been consistent, the members have always been helpful, friendly and generous in their time and sharing their knives and their passion for them. In the end awe all want the same thing, a friendly place to hangout with like minded people and discuss everything sharp and pointy.

I have to wan you about one thing though, they're the worst enablers but will give you the shirt off there backs to help feed that addiction or give you great deals you can't refuse. If it wasn't for these great folks here I wouldn't have gotten the opportunity to handle and play with as many different knives as I have in the last 19 years here. I got to handle my first Sebenza 18 years ago and had it for a little over a week to enjoy as a result of a pass around. Thanks and RIP to Dave H for that. You're missed and remembered every time I pick up a Sebenza or the Spyderco Centofonte you gifted me when mine broke and Tim at Spyderco couldn't replace it as it was discontinued.

This place is full of stories of the kindness of the members here and you hear it on all the forums and sub forums here. You'll also hear about a certain darker side, don't believe everything you hear, read the stickies at the door and take everything into consideration and remember as always YMMV.

BTW it was Benchmade the great folks of BFC had gotten me started into as a result of joining.

Josh, Welcome! Good for you goin' gold right out of the gate and supporting one of the... no, the greatest and largest knife forum on the internet. I've been here a long time, even before there was a blade forums when it was a collection of bulletin board knife knuts who got together on the internet at night and talked about knives and a lot of other unrelated things but there was always a picture of a knife or a comment about a blade. We've got the makers and the shakers here. We've got more custom makers, blade smiths and owners and reps from most of the major manufacturers. Blade smiths and grinder jockeys from novice to master smith like to put their feet up here and help out anyway they can so you'll never be at a loss for resources, expert advice (snd some dumb advice sprinkled in there too

There's ton's of functions and customability available to tailor forum experience to insure a great experience each time you log in. One thing's always been consistent, the members have always been helpful, friendly and generous in their time and sharing their knives and their passion for them. In the end awe all want the same thing, a friendly place to hangout with like minded people and discuss everything sharp and pointy.

I have to wan you about one thing though, they're the worst enablers but will give you the shirt off there backs to help feed that addiction or give you great deals you can't refuse. If it wasn't for these great folks here I wouldn't have gotten the opportunity to handle and play with as many different knives as I have in the last 19 years here. I got to handle my first Sebenza 18 years ago and had it for a little over a week to enjoy as a result of a pass around. Thanks and RIP to Dave H for that. You're missed and remembered every time I pick up a Sebenza or the Spyderco Centofonte you gifted me when mine broke and Tim at Spyderco couldn't replace it as it was discontinued.

This place is full of stories of the kindness of the members here and you hear it on all the forums and sub forums here. You'll also hear about a certain darker side, don't believe everything you hear, read the stickies at the door and take everything into consideration and remember as always YMMV.

BTW it was Benchmade the great folks of BFC had gotten me started into as a result of joining.

 

[Joshd24]

Lol, op you are screwed. You got knife fever. The pm2 is gunna make you a happy camper. Very cool that @KELAMA loaned you a zt. Kinda like a drug pusher. Enjoy the journey and see you around.

Oh, and if budget isnt and issue, get the most pimped out pm2 you can find! You really can't go wrong.

It was an awesome gesture and a fantastic Blade!

 

[115Italian]

I know you're looking at a pm2 but since you like the tenacious so much, the manix 2 popped into my mind as a next logical step. Just a suggestion. Pm2 wise, why not start with the base s30v. Spyderco does s30v very well.

 

[sabre cat]

I know you're looking at a pm2 but since you like the tenacious so much, the manix 2 popped into my mind as a next logical step. Just a suggestion. Pm2 wise, why not start with the base s30v. Spyderco does s30v very well.

Yes they do. If they would only make the Tenacious in S30v....

 

[Joshd24]

I took the plunge and bought a pm2 in s30v

 

[NJBillK]

Pics when it arrives.
Let us know how it works out for your daily uses.

What do you have for sharpening equipment?

 

[sabre cat]

I took the plunge and bought a pm2 in s30v

It's a fine product and you should be very happy with it.

 

[Joshd24]

I bought a lanske deluxe sharpening system. I'm still practicing so any advice there is appreciated!!!

 

[Joshd24]

https://imgur.com/a/sLxs2

Here she is!!! So in love with this knife and I have been using it !!!!

 

[fivesense]

Maxamet is right around the corner. I'm looking forward to it

Do we know when the Maxamet PM2 is set to be released?

 

[fivesense]

Josh, Welcome! Good for you goin' gold right out of the gate and supporting one of the... no, the greatest and largest knife forum on the internet. I've been here a long time, even before there was a blade forums when it was a collection of bulletin board knife knuts who got together on the internet at night and talked about knives and a lot of other unrelated things but there was always a picture of a knife or a comment about a blade. We've got the makers and the shakers here. We've got more custom makers, blade smiths and owners and reps from most of the major manufacturers. Blade smiths and grinder jockeys from novice to master smith like to put their feet up here and help out anyway they can so you'll never be at a loss for resources, expert advice (snd some dumb advice sprinkled in there too

There's ton's of functions and customability available to tailor forum experience to insure a great experience each time you log in. One thing's always been consistent, the members have always been helpful, friendly and generous in their time and sharing their knives and their passion for them. In the end awe all want the same thing, a friendly place to hangout with like minded people and discuss everything sharp and pointy.

I have to wan you about one thing though, they're the worst enablers but will give you the shirt off there backs to help feed that addiction or give you great deals you can't refuse. If it wasn't for these great folks here I wouldn't have gotten the opportunity to handle and play with as many different knives as I have in the last 19 years here. I got to handle my first Sebenza 18 years ago and had it for a little over a week to enjoy as a result of a pass around. Thanks and RIP to Dave H for that. You're missed and remembered every time I pick up a Sebenza or the Spyderco Centofonte you gifted me when mine broke and Tim at Spyderco couldn't replace it as it was discontinued.

This place is full of stories of the kindness of the members here and you hear it on all the forums and sub forums here. You'll also hear about a certain darker side, don't believe everything you hear, read the stickies at the door and take everything into consideration and remember as always YMMV.

BTW it was Benchmade the great folks of BFC had gotten me started into as a result of joining.

Great post! This kind of post is what makes this forum fun to keep returning.

 

[McFeeli]

https://imgur.com/a/sLxs2

Here she is!!! So in love with this knife and I have been using it !!!!

Ha! You're following an unending trail of Spyderco's now. I did the same thing, Tenacious to PM2. Probably the best direction I could have went. You should thoroughly enjoy the journey.

Glad to hear you're using it too, it took me like a month or two until I really started using my PM2 the way it was meant for.

 

[fivesense]

Hi Josh, I noticed that you joined us just a few months ago and your knife purchases averaged about, what...one a month?

Many of us here went through a spell that we bought knives like crazy right after joining. Most of us that have "been there, done that," all have one thing in common. We end up with tons of knives that don't meet our needs, we will never use, and we don't enjoy. Consider picking a number to limit the size of your collection. Or, your purchases per month/year, etc. A knife comes in, a knife goes out, so to speak. Your bank account will thank you.

I guess what I'm trying to say is take it slow. Enjoy what you have. Find out what knife features make you smile instead of what knife brings a grin to your face. If you do this, you will end up with a smaller collection, that is better quality, holds it's value and truly fits your lifestyle.

If I may make two suggestions, 1)Learn how to maintain your collection. 2)Use the knives you have for a while. I mean really use them. Use a knife long enough to get out of the honeymoon phase and find out if it really meets your needs. Then move forward, upgrade and improve. And, give your Tenacious a real chance before you go to a better model. It really is an excellent blade for the money.

BTW, Check out Nick Shabazz on you tube. He has lots of excellent Spyderco knife reviews. They are all worth watching. Especially those where he talks about the PM2 series.

Outstanding advice!

It's too easy to get a knife, handle it for a day or so, read a review online that says the steel is prone to chipping or rolling and then fall immediately out of love with the knife- without actually using it! Been there, done that.

I'm now at the phase where I truly consider my needs (and wants!) but when that knife arrives, I use it. I learn the steel. That also comes from learning how to maintain and sharpen the steel. I almost fast fell out of love with my Blurple S110V PM2 because the edge chipped and rolled after minimal slicing. But this group educated me that the factory edge is prone to such issues and once I "sharpen through" the factory edge, only then will I see the true capability of S110V.

Once your have 1-2 knives in your EDC rotation, I recommend investing in a good sharpening system before buying another knife. When you know you can handle all your sharpening needs, you will love the process of maintaining your knives, and you will feel extra confident that you can use them harder than you ever thought possible. I have whetstones and a Sharpmaker, but I find I use the Sharpmaker almost every day (or at least a few times a week) for light touch ups.

It's important to remember that knives are tools, albeit extremely cool to carry and use tools! Many people are safe queen collectors and many of the reviews online are no more than unboxing reviews. So find a few knives you like and can rotate carrying. Have an idea what you want to use the knife for and then push it, within reason. If you find, like I did, that you need a grunt user, don't underestimate the benefit of a Swiss Army knife companion to one of your cooler blade-only knives. A SAK will keep you out of trouble with your steel.

Just be careful because SAK buying is just as addictive!

 

[fivesense]

Ha! You're following an unending trail of Spyderco's now. I did the same thing, Tenacious to PM2. Probably the best direction I could have went. You should thoroughly enjoy the journey.

Glad to hear you're using it too, it took me like a month or two until I really started using my PM2 the way it was meant for.

I'm actually still too easy on my PM2, and I want to start pushing it a little bit. When you say you started using the PM2 the way it was meant to be used, what do you mean? What's the spectrum of tasks for which you'll use this great knife?

 

[McFeeli]

I'm actually still too easy on my PM2, and I want to start pushing it a little bit. When you say you started using the PM2 the way it was meant to be used, what do you mean? What's the spectrum of tasks for which you'll use this great knife?

Haha, what I meant was that I finally started to use it as a knife and not an accessory. Cardboard, zip ties, hoses, and of course that god forsaken substance called "tape", haha.

Going from a $40 knife to a $120 knife kind of shocks the system, especially the first time, and at least for me I just didn't use my Paramilitary right from the start. Pretty sure I just cut paper and paracord for a good long while.

 

[fivesense]

Haha, what I meant was that I finally started to use it as a knife and not an accessory. Cardboard, zip ties, hoses, and of course that god forsaken substance called "tape", haha.

Going from a $40 knife to a $120 knife kind of shocks the system, especially the first time, and at least for me I just didn't use my Paramilitary right from the start. Pretty sure I just cut paper and paracord for a good long while.

I certainly understand that. I cut a lot of tape on packages and open mail with my PM2, but it doesn't get much harder use than that. I need to not worry about the tip like I do and just use the knife- not only to take advantage of the blade, but also the phenomenal compression lock.

I've got a Yojimbo 2 that can handle about an equal amount of use, but I prefer to keep its tip (and edge) in shape for its intended application.

 

[McFeeli]

I certainly understand that. I cut a lot of tape on packages and open mail with my PM2, but it doesn't get much harder use than that. I need to not worry about the tip like I do and just use the knife- not only to take advantage of the blade, but also the phenomenal compression lock.

I've got a Yojimbo 2 that can handle about an equal amount of use, but I prefer to keep its tip (and edge) in shape for its intended application.

That makes sense, though. The PM2 is basically an EDC knife, so supposed to handle "normal" cutting chores, while the Yojimbo is all gears towards self defense. I wouldn't be afraid of using it to cut stuff or anything, as long as your confident in bringing the edge back to par.

And I will say I was the same when it came to my Para's point, it is afterall incredibly thin. I've read where some have broken their off, but I haven't had a single problem with mine. I've stabbed a few things I probably shouldn't have(lots of plastic bottles), and it's still there haha. So don't be afraid to stab it through whatever needs stabbin'.

 

[fivesense]

So don't be afraid to stab it through whatever needs stabbin'.

In his review on the Dragonfly 2, one of Nick Shabazz' quotes is "Who needs to do stabbin'?"

 

[sharp_edge]

OP- congrats on your beautiful PM2! I have the exact same model - DLC blade and digicam scale

 

[NJBillK]

I'm actually still too easy on my PM2, and I want to start pushing it a little bit. When you say you started using the PM2 the way it was meant to be used, what do you mean? What's the spectrum of tasks for which you'll use this great knife?

Everything shy of prying and using as a screwdriver.
If something needs cutting, use your PM2. Don't worry if it is bags of sand, concrete, lumber banding, zip ties, tags on clothes, an apple during lunch or peeling a potato.