Small Sebenza 31 with Bog Oak inlays, factory glass blasted titanium, and swapped S45VN drop point blade
$420 PayPal F&F or $435 PayPal G&S shipped USPS Priority
$400 PayPal F&F or $415 PayPal G&S shipped USPS Priority
Small Bog Oak 31, originally had a ladder damascus blade but I swapped that one to a Knife Art carbon fiber 31. So this one is sporting an S45VN drop point blade with blue lugs (also swapped pivot bushing, washers, stop sleeve, backspacer). Glassy smooth, centered, solid lockup with zero stick. Standard CRK excellent fit, finish, and action. Comes with original packaging, CRK leather slip, and CRK clip delete tab. Box, docs, cloth, lube, Loctite, and wrench are also included - no original lanyard.
Notes on condition of the knife:
→ I gave the backspacer a satin/brushed finish that looks pretty close to the glass blasted scales.
→ Blade was sharpened on my wicked edge to 1000 grit, matched the height of the factory bevels at about 22 degrees per side. It's razor sharp with nice and even bevels along the blade. * Some slight wear on the blue thumb studs.
→ There is a weird stain on the butt of the knife: some darker specs and sort of a dark area on the titanium. The video shows it well. This was there when I purchased the knife and the stain has not changed or anything so I don't believe it is rust. Nothing a reblast couldn't fix.
→ No snails or any signs of use on the scales or the blade.
I think the blue studs look good with the bog oak, but I can swap them out for some TiConnector studs for an additional $20. Here is the knife with the TC studs installed on another blade of mine, just to give an idea of what it would look like: Bog Oak w/ Ti Studs
In it's current condition, warranty is still valid on this one. I have added a screenshot of their response at the bottom of the post.
Trade interests:
→ Large 21 black micarta drop point or Insingo
→ Small Inkosi Knife Art Carbon Fiber
**Pics:**
$400 PayPal F&F or $415 PayPal G&S shipped USPS Priority
Small Bog Oak 31, originally had a ladder damascus blade but I swapped that one to a Knife Art carbon fiber 31. So this one is sporting an S45VN drop point blade with blue lugs (also swapped pivot bushing, washers, stop sleeve, backspacer). Glassy smooth, centered, solid lockup with zero stick. Standard CRK excellent fit, finish, and action. Comes with original packaging, CRK leather slip, and CRK clip delete tab. Box, docs, cloth, lube, Loctite, and wrench are also included - no original lanyard.
Notes on condition of the knife:
→ I gave the backspacer a satin/brushed finish that looks pretty close to the glass blasted scales.
→ Blade was sharpened on my wicked edge to 1000 grit, matched the height of the factory bevels at about 22 degrees per side. It's razor sharp with nice and even bevels along the blade. * Some slight wear on the blue thumb studs.
→ There is a weird stain on the butt of the knife: some darker specs and sort of a dark area on the titanium. The video shows it well. This was there when I purchased the knife and the stain has not changed or anything so I don't believe it is rust. Nothing a reblast couldn't fix.
→ No snails or any signs of use on the scales or the blade.
I think the blue studs look good with the bog oak, but I can swap them out for some TiConnector studs for an additional $20. Here is the knife with the TC studs installed on another blade of mine, just to give an idea of what it would look like: Bog Oak w/ Ti Studs
In it's current condition, warranty is still valid on this one. I have added a screenshot of their response at the bottom of the post.
Trade interests:
→ Large 21 black micarta drop point or Insingo
→ Small Inkosi Knife Art Carbon Fiber
**Pics:**
Last edited: