- Joined
- Mar 20, 2016
- Messages
- 14,411
Today's offering are two items from my tomahawk and hatchet collection looking for good homes. One owner, never been used or carried in the field. Collection pieces which have basically been inspected, handled and fondled for enjoyment.
- These items are also currently cross listed on the Big Auction Site for higher $ plus shipping plus the state taxes which you will be charged by The Man over there! Offering these here on Blade Forums at a little below my own original cost from a few years ago. No trades please as I just want to thin things down and cash out.
SOLD (#1) Ben Tendick / BRT Bladeworks Peregrine tomahawk pack axe (was originally bought in Apr 2015 for 425 directly from the shop, see the posted photo from Ben's IG).
One and only $ reduction:
- using PayPal G&S adding 5% =$325 $315 SOLD ... ( my apologies as I can not accept PP F&F because I have a business account with them).
SPECS:
OAL ~ 11"
Head Length ~ 5.25"
Cutting Edge ~ 3"
Weight ~ 1lb. 13.9 oz w/o - 2 lb. 2.1 oz Sheathed
Steel - 3/8" 4140 through hardened to appx. 55HRC with a spring tempered tang for extreme durability and toughness
Handle - OD green G10, attached with flared stainless tubes and G-flex epoxy for a rock solid handle
Sheath - Kydex w/ quick release bungee retention. This is setup with belt loops
This is built with 3/8" 4140. It is through hardened and then spring tempered the tang for extra toughness. Has a sharp / mean spike at the pole! Although beefy, it is quite well balanced and pack a lot of punch. This one has OD green G10 scales with some differently looking handle texturing on this one. The scales are attached using both G/flex epoxy and flared stainless tubes. Comes with green axe head Kydex cover and COA. Finish is field grade so it will show some tooling marks plus faint kydex drag marks!
SOLD (#2) Henry Torres (ABS-MS) hand forged hatchet, ball pein head and hickory handle (was originally bought at his table back in 2014 for ~ 300).
- by using Venmo F&F or Zelle = $210 SOLD
Specs:
Blade length ~ 4 7/8"
Cutting edge length ~ 1 7/8"
Total length ~ 10 3/8" in.
Weight ~ 12.20 oz.
Blade: Ball pein hammer forged into a hatchet head
Handle: Hickory with sinew wrap
This hatchet is the work of Master Smith Henry Torres. The head was forged to shape from a ball pein hammer. This recycled carbon steel ensures a keen lasting edge. This hatchet comes with a leather pouch cover made by Henry for the head. The last phot is of a similar (not the same!) work by Henry as it was posted way back on Blade Gallery's website.
My terms are:
- USPS Ground (GAM) shipping included.
- Domestic only, no International Shipping.
- What you see is exactly what you will get.
- Will only do business with whomever I choose.
- All sales are final, meaning no buyer's remorse.
- Know your local laws. Must be 18 years or older.
- I don't use email to communicate, only DM on here.
SPF
- These items are also currently cross listed on the Big Auction Site for higher $ plus shipping plus the state taxes which you will be charged by The Man over there! Offering these here on Blade Forums at a little below my own original cost from a few years ago. No trades please as I just want to thin things down and cash out.
SOLD (#1) Ben Tendick / BRT Bladeworks Peregrine tomahawk pack axe (was originally bought in Apr 2015 for 425 directly from the shop, see the posted photo from Ben's IG).
One and only $ reduction:
- using PayPal G&S adding 5% =
SPECS:
OAL ~ 11"
Head Length ~ 5.25"
Cutting Edge ~ 3"
Weight ~ 1lb. 13.9 oz w/o - 2 lb. 2.1 oz Sheathed
Steel - 3/8" 4140 through hardened to appx. 55HRC with a spring tempered tang for extreme durability and toughness
Handle - OD green G10, attached with flared stainless tubes and G-flex epoxy for a rock solid handle
Sheath - Kydex w/ quick release bungee retention. This is setup with belt loops
This is built with 3/8" 4140. It is through hardened and then spring tempered the tang for extra toughness. Has a sharp / mean spike at the pole! Although beefy, it is quite well balanced and pack a lot of punch. This one has OD green G10 scales with some differently looking handle texturing on this one. The scales are attached using both G/flex epoxy and flared stainless tubes. Comes with green axe head Kydex cover and COA. Finish is field grade so it will show some tooling marks plus faint kydex drag marks!
SOLD (#2) Henry Torres (ABS-MS) hand forged hatchet, ball pein head and hickory handle (was originally bought at his table back in 2014 for ~ 300).
- by using Venmo F&F or Zelle = $210 SOLD
Specs:
Blade length ~ 4 7/8"
Cutting edge length ~ 1 7/8"
Total length ~ 10 3/8" in.
Weight ~ 12.20 oz.
Blade: Ball pein hammer forged into a hatchet head
Handle: Hickory with sinew wrap
This hatchet is the work of Master Smith Henry Torres. The head was forged to shape from a ball pein hammer. This recycled carbon steel ensures a keen lasting edge. This hatchet comes with a leather pouch cover made by Henry for the head. The last phot is of a similar (not the same!) work by Henry as it was posted way back on Blade Gallery's website.
My terms are:
- USPS Ground (GAM) shipping included.
- Domestic only, no International Shipping.
- What you see is exactly what you will get.
- Will only do business with whomever I choose.
- All sales are final, meaning no buyer's remorse.
- Know your local laws. Must be 18 years or older.
- I don't use email to communicate, only DM on here.
SPF
Last edited:
