Daado
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 5, 2015
- Messages
- 2,298
Another pair forged from 1/8" flat bar of 15N20.
They are wicked sharp little slicers.
I've tried to forge them to fit in Bird 'n trout or nice EDC design, and to keep it good looking and simple, but this time really thin. They are differential heat treated with clay and hand sanded with 1500 grit.
Etched in lemon acid, and there is nice hardening line visible on the bevels.
Flats are wet forged and wire brushed.
Sheaths are made from light brown 4mm thick (0,16") vegetable leather.
#1
For handle material, i used plum wood, red vulkanfiber liners and carbon fiber pins.
Details:
Overall length - 7,6"
Blade length - 3,3"
Blade width - 1"
Thickness at the back of the spine - 0,07" (1,8mm)
Knife weight is 2,02oz, and with sheath is 4,73oz
Asking SOLD, priority shipping with tracking number included
#2
For handle material, i used walnut wood, red vulkanfiber liners and carbon fiber pins.
Details:
Overall length - 7,5"
Blade length - 3,2"
Blade width - 1"
Thickness at the back of the spine - 5/64"
Knife weight is 2,02oz, and with sheath is 4,73oz
Asking SOLD, priority shipping with tracking number included
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
They are wicked sharp little slicers.
I've tried to forge them to fit in Bird 'n trout or nice EDC design, and to keep it good looking and simple, but this time really thin. They are differential heat treated with clay and hand sanded with 1500 grit.
Etched in lemon acid, and there is nice hardening line visible on the bevels.
Flats are wet forged and wire brushed.
Sheaths are made from light brown 4mm thick (0,16") vegetable leather.
#1
For handle material, i used plum wood, red vulkanfiber liners and carbon fiber pins.
Details:
Overall length - 7,6"
Blade length - 3,3"
Blade width - 1"
Thickness at the back of the spine - 0,07" (1,8mm)
Knife weight is 2,02oz, and with sheath is 4,73oz
Asking SOLD, priority shipping with tracking number included
#2
For handle material, i used walnut wood, red vulkanfiber liners and carbon fiber pins.
Details:
Overall length - 7,5"
Blade length - 3,2"
Blade width - 1"
Thickness at the back of the spine - 5/64"
Knife weight is 2,02oz, and with sheath is 4,73oz
Asking SOLD, priority shipping with tracking number included
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
Last edited:
