<Sold>52100 Hunter Slicer

John Cahoon

JWC Custom Knives
Knifemaker / Craftsman / Service Provider
Feedback: +58 / =0 / -0
Joined
Apr 13, 2017
Messages
2,174
Hi everyone, Here’s my favorite hunter slicer style offered up for your consideration. It is ready for a variety of tasks in the field.

Steel 5/32” 52100 professional HT 60/61 hand sanded to P1200 grit for a clean satin finish.

Edge before sharpening was .015” or so and the blade glides through phone book paper, leather, rope etc. There are a couple of small heat treat “divots”, hard to see in the pictures but one is on the right side near the spine in front of the plunge. No charge for the added character!

Dimensions: 9 15/16” OAL, Tip to Scales 5 9/16”, Width 1 ½”.

Highly figured Bocote scales sanded to 1200 grit. Scales are finished with Danish oil and carnauba wax. Pins and tube are copper and touch points are rounded where they need to be. It feels great in my average sized hands. Lined and dyed sheath, molded at the ricasso for a very snug fit. It will come with a fluorescent orange paracord lanyard.

Asking only $160 for this beauty, via paypal, check or MO. Your satisfaction is my only priority. Feel free to comment, ask any questions or request more pictures. Thanks for looking!

19-7 1.JPG 19-7 2.JPG 19-7 3.JPG 19-7 4.JPG 19-7 5.JPG
 
Hi knifeknut knifeknut thanks for your very kind words and endorsement, I'm really happy you like it and the feedback is very important to me. I've used one of the photos as the banner pic on my facebook page too.

I often grind in pairs at least but this time I've got three additional very similar waiting on deck and a couple of hidden tang versions as well, but the hidden tang ones are in 440C (and don't get the love that steel deserves).
 
Last edited:
Back
Top