- Joined
- Apr 28, 2015
- Messages
- 1,735
**Subjectively of course 
This is a 3 inch Hinderer Slicer grind. I bought it a few months ago from a fellow member. Many things were never disclosed. Let me get these out of the way firstly:
1.) This knife has been sharpened: it has been brought down to a lower degree per side edge. It's still super sharp and in good shape, just not factory.
2.) If you look close enough you can see that there are a mixture of silver and copper handle screws holding the knife together: I received the knife with 2 entirely stripped silver screws and an entirely stripped copper one. The pivot screw also came a little dinged as shown in the picture below. The ones in the scale are okay, but will need replaced at some point in the future.
That's it for the "bad"; nothing too detrimental and does not effect the performance.
Flips like a damn champ. A little push of the tab and this thing flies out. The thumbstuds are pointless for the detent is incredibly strong on this one. One of the washers is a little messed up but doesn't effect the centering, flipping action or lockup. This thing locks up like a Hinderer should; freaking tight.
Comes with 2 scales, black and jade ghost. Comes with copper standoffs as well as factory silver ones. Also has a copper LBS and pivot screw as well as factory silver LBS and pivot screw. I also have a custom Sketchen OD green micarta scale and filler tab. I will sell the scale and tab filler for $70 OR make me an offer of some kind. I'm not really sure how to price this...
For everything pictured except the Sketchen scale I am asking $325-knife is sold, scale still up for grabs That is two scales, two sets of standoffs, two LBS-es and two pivot screws and an amazingly smooth and strong flipping Hinderer.
I will consider trades but am looking for something different. Rare Benchmades, exotics, non-flipper Hinderer, CF and Ti always make me smile.
**Rules and things**
Price is net to me. F&F or add 3.5% please
I will ship USPS Priority 2-3 day
CONUS only unless you add the ridiculous $22 for international
First person to pique interest is my first customer; I won't sell it underneath you unless a reasonable amount of time has passed.
First expressed "I'll take it" gets it.
This is a 3 inch Hinderer Slicer grind. I bought it a few months ago from a fellow member. Many things were never disclosed. Let me get these out of the way firstly:
1.) This knife has been sharpened: it has been brought down to a lower degree per side edge. It's still super sharp and in good shape, just not factory.
2.) If you look close enough you can see that there are a mixture of silver and copper handle screws holding the knife together: I received the knife with 2 entirely stripped silver screws and an entirely stripped copper one. The pivot screw also came a little dinged as shown in the picture below. The ones in the scale are okay, but will need replaced at some point in the future.
That's it for the "bad"; nothing too detrimental and does not effect the performance.
Flips like a damn champ. A little push of the tab and this thing flies out. The thumbstuds are pointless for the detent is incredibly strong on this one. One of the washers is a little messed up but doesn't effect the centering, flipping action or lockup. This thing locks up like a Hinderer should; freaking tight.
Comes with 2 scales, black and jade ghost. Comes with copper standoffs as well as factory silver ones. Also has a copper LBS and pivot screw as well as factory silver LBS and pivot screw. I also have a custom Sketchen OD green micarta scale and filler tab. I will sell the scale and tab filler for $70 OR make me an offer of some kind. I'm not really sure how to price this...
For everything pictured except the Sketchen scale I am asking $325-knife is sold, scale still up for grabs That is two scales, two sets of standoffs, two LBS-es and two pivot screws and an amazingly smooth and strong flipping Hinderer.
I will consider trades but am looking for something different. Rare Benchmades, exotics, non-flipper Hinderer, CF and Ti always make me smile.
**Rules and things**
Price is net to me. F&F or add 3.5% please
I will ship USPS Priority 2-3 day
CONUS only unless you add the ridiculous $22 for international
First person to pique interest is my first customer; I won't sell it underneath you unless a reasonable amount of time has passed.
First expressed "I'll take it" gets it.
Last edited:
