A change in lifestyle has lead me to sell my collection of assorted fixed blades. Sold as a package only. Most in very good condition, some never used except drawing from the sheath occasionally. The only ones that saw hard use were the Gerber LMF II and BG knife, but those are in good shape too - no damage. Some have been modified to my tastes, and that's reflected in the price.
Here's what's in the collection, $600:
Benchmade Nimravus (x2) - one black, one tan, like new condition. Armatus sheath for each plus tan factory sheath
Benchmade Adamas (original D2 version), factory sheath with diamond stone attached. I made G10 scales and epoxied them on, put ranger bands on handle for added grip. Ferro rod notch added.
ESEE Laser Strike with TKC G10 scales and factory sheath. No mods. Like new
ESEE 6 with TKC G10 scales. Spec-Ops Combat Master sheath. Ferro rod notch added. Very good
Architect Field Buddy 5.5 with TKC G10 scales and kydex sheath. Ferro rod notch added to replace thumb jimping, scales epoxied on.
TOPS BOB Fieldcraft with factory G10 scales. Ferro rod notch added, Armatus kydex sheath, factory kydex sheath, TOPS ferro rod. Like new beside ferro rod notch.
Steel Will Roamer 300 D2. Like new except a few scuffs on blade coating. no mods
Buck Thug - stripped and etched, removed finger choil between index/middle fingers, scales epoxied to handle. Factory sheath with kydex retainer attached.
Leuku - heat treated blank from Scandinavian maker on Etsy, I added wood scales and self-made the kydex sheath. ~9 inch blade
Gerber Yari II (S30V) - replaced aluminum scales with self-made scales of G10 (epoxied on), ground off serrations, self-made kydex sheath
RAT RTAK II - modded micarta scales (epoxied on), ground from drop point to spear point (wet ground to not ruin temper), stripped coating and etched.
Damascus: blank from Amazon, added wood scales and self-made leather sheath
Kershaw camp 10 - no mods, good condition except scuffs on blade coating
Gerber LMF II - well used but good condition, no looseness in handle, etc. Ground off serrations
TOPS Tom Brown tracker - sawed off saw teeth from spine (cold with hack saw so as not to ruin temper), stripped and etched, tried to convex the edge. Homemade kydex sheath, edge needs work but still has original temper. scales epoxied on
SOG Fusion bowie - no mods, factory sheath
SOG Seal pup - no mods, factory sheath
Items not factored into the price, included just to get rid of:
Self-made fixed blade (~10in blade) from a design I saw in BudK catalog. A2 steel, black powder coat. HT to ~59-60 myself using evenheat oven. self-made kydex sheath
Self-made fixed blades (x2, ~7.5in blade) based on a design I saw in a BudK catalog. A2 steel, short-handled one has black powder coat, the other is etched. HT to ~59-60 myself using evenheat oven. self-made kydex sheath
Assorted others.
Paypal G&S only. Ships to CONUS only, fully insured, signature confirmation required. Postage and PP fees included in price. No trades please. PM if you want more pics.
I assume no liability for your ownership/use of the knives. By purchasing the buyer certifies they can legally possess them and assumes all responsibility for local laws.
Here's what's in the collection, $600:
Benchmade Nimravus (x2) - one black, one tan, like new condition. Armatus sheath for each plus tan factory sheath
Benchmade Adamas (original D2 version), factory sheath with diamond stone attached. I made G10 scales and epoxied them on, put ranger bands on handle for added grip. Ferro rod notch added.
ESEE Laser Strike with TKC G10 scales and factory sheath. No mods. Like new
ESEE 6 with TKC G10 scales. Spec-Ops Combat Master sheath. Ferro rod notch added. Very good
Architect Field Buddy 5.5 with TKC G10 scales and kydex sheath. Ferro rod notch added to replace thumb jimping, scales epoxied on.
TOPS BOB Fieldcraft with factory G10 scales. Ferro rod notch added, Armatus kydex sheath, factory kydex sheath, TOPS ferro rod. Like new beside ferro rod notch.
Steel Will Roamer 300 D2. Like new except a few scuffs on blade coating. no mods
Buck Thug - stripped and etched, removed finger choil between index/middle fingers, scales epoxied to handle. Factory sheath with kydex retainer attached.
Leuku - heat treated blank from Scandinavian maker on Etsy, I added wood scales and self-made the kydex sheath. ~9 inch blade
Gerber Yari II (S30V) - replaced aluminum scales with self-made scales of G10 (epoxied on), ground off serrations, self-made kydex sheath
RAT RTAK II - modded micarta scales (epoxied on), ground from drop point to spear point (wet ground to not ruin temper), stripped coating and etched.
Damascus: blank from Amazon, added wood scales and self-made leather sheath
Kershaw camp 10 - no mods, good condition except scuffs on blade coating
Gerber LMF II - well used but good condition, no looseness in handle, etc. Ground off serrations
TOPS Tom Brown tracker - sawed off saw teeth from spine (cold with hack saw so as not to ruin temper), stripped and etched, tried to convex the edge. Homemade kydex sheath, edge needs work but still has original temper. scales epoxied on
SOG Fusion bowie - no mods, factory sheath
SOG Seal pup - no mods, factory sheath
Items not factored into the price, included just to get rid of:
Self-made fixed blade (~10in blade) from a design I saw in BudK catalog. A2 steel, black powder coat. HT to ~59-60 myself using evenheat oven. self-made kydex sheath
Self-made fixed blades (x2, ~7.5in blade) based on a design I saw in a BudK catalog. A2 steel, short-handled one has black powder coat, the other is etched. HT to ~59-60 myself using evenheat oven. self-made kydex sheath
Assorted others.
Paypal G&S only. Ships to CONUS only, fully insured, signature confirmation required. Postage and PP fees included in price. No trades please. PM if you want more pics.
I assume no liability for your ownership/use of the knives. By purchasing the buyer certifies they can legally possess them and assumes all responsibility for local laws.
