- Joined
- Oct 13, 2013
- Messages
- 1,010
TWO CUSTOM FIXED BLADES FOR SALE (I'll post two more late tomorrow as well): Offering at low prices as these are just not used and need to move them on to those who will use/appreciate them. (Please note that all knives are uncarried, unused, and retain original sharpened edges by maker... any defects (minor) are noted and came from the maker or previous owner where noted):
INSTRUCTIONS: The first "I'll take ______," followed by a PM and immediate payment by PayPal, gets it. I will ship all items by USPS PRIORITY MAIL WITH TRACKING to US addresses. If you want Express or shipping to Canada, please contact me for a total before you pay. ALL PRICES ARE FIRM AND NET TO ME (add 3% if paying by goods and services). I will mail your item(s) out the next business day and provide you a tracking number. NO TRADES and NO INTERNATIONAL SHIPPING... Sorry. IF YOU WANT MORE INFORMATION OR PICS, PLEASE PM ME.
$SOLD - BRADSHAW NIGHTMARE SLICER w/COA, lanyard, and maker's coyote brown Kydex sheath... $SOLD. PLEASE NOTE: There is a different lanyard on this since the pictures were taken... this knife will not come with the lanyard and bead shown.
Originally, much more expensive, I have lowered the cost substantially because I found a tiny flaw: On the copper inlace bolster, there is a slight hairline crack in the material at the copper pin (you cannot feel the crack), only visible in certain light. I tried to capture it. Other than that, this knife is a beast and sharp as heck. Very ergonomic and comes with a Kydex sheath.
From Casey's original thread: "BASICALLY ITS A COMPOUND GRIND WHERE I WENT BACK OVER THE HOLLOW WITH A FLAT GRIND AND BLENDED THE FLAT TIP! VERY CUTTY!! YES THATS A WORD TO ME!"
BLADE STEEL: 52100 BEARING STEEL
BLADE LENGTH- 3 3/4
THICKNESS- 3/16
OAL- 8 1/4
grind- HOLLOW WITH BLENDED FLAT TIP
HAND STROPPED TO A MIRRORED RAZOR EDGE SHARPER THAN PISS
UNSHARPENED SWEDGE
RC-58-59
TRIPLE NORMALISED FOR GRAIN REFINEMENT
DEEP CHOIL SO NO CHANCE OF GOING UP ONTO THE BLADE
HANDLE SCALES- CANVAS MICARTA WITH COPPER INLACE BOLSTERS AND BLACK LINERS!!!!
COPPER HARDWARE
KYDEX SHEATH SPACED FOR A LG TEK LOK AS USUAL
Casey's Original Thread: http://www.bladeforums.com/forums/s...ghtmare-slicer-***?highlight=nightmare+slicer
INSTRUCTIONS: The first "I'll take ______," followed by a PM and immediate payment by PayPal, gets it. I will ship all items by USPS PRIORITY MAIL WITH TRACKING to US addresses. If you want Express or shipping to Canada, please contact me for a total before you pay. ALL PRICES ARE FIRM AND NET TO ME (add 3% if paying by goods and services). I will mail your item(s) out the next business day and provide you a tracking number. NO TRADES and NO INTERNATIONAL SHIPPING... Sorry. IF YOU WANT MORE INFORMATION OR PICS, PLEASE PM ME.
$SOLD - BRADSHAW NIGHTMARE SLICER w/COA, lanyard, and maker's coyote brown Kydex sheath... $SOLD. PLEASE NOTE: There is a different lanyard on this since the pictures were taken... this knife will not come with the lanyard and bead shown.
Originally, much more expensive, I have lowered the cost substantially because I found a tiny flaw: On the copper inlace bolster, there is a slight hairline crack in the material at the copper pin (you cannot feel the crack), only visible in certain light. I tried to capture it. Other than that, this knife is a beast and sharp as heck. Very ergonomic and comes with a Kydex sheath.
From Casey's original thread: "BASICALLY ITS A COMPOUND GRIND WHERE I WENT BACK OVER THE HOLLOW WITH A FLAT GRIND AND BLENDED THE FLAT TIP! VERY CUTTY!! YES THATS A WORD TO ME!"
BLADE STEEL: 52100 BEARING STEEL
BLADE LENGTH- 3 3/4
THICKNESS- 3/16
OAL- 8 1/4
grind- HOLLOW WITH BLENDED FLAT TIP
HAND STROPPED TO A MIRRORED RAZOR EDGE SHARPER THAN PISS
UNSHARPENED SWEDGE
RC-58-59
TRIPLE NORMALISED FOR GRAIN REFINEMENT
DEEP CHOIL SO NO CHANCE OF GOING UP ONTO THE BLADE
HANDLE SCALES- CANVAS MICARTA WITH COPPER INLACE BOLSTERS AND BLACK LINERS!!!!
COPPER HARDWARE
KYDEX SHEATH SPACED FOR A LG TEK LOK AS USUAL
Casey's Original Thread: http://www.bladeforums.com/forums/s...ghtmare-slicer-***?highlight=nightmare+slicer
Last edited:
