scalpel_ninja
Gold Member
- Joined
- Feb 17, 2020
- Messages
- 86
Timestamp
Good day swappers! I have for you the ultimate EDC upgrade opportunity. Prices include insured shipping within the US (no international sales); funds accepted include PayPal FF, Zelle, and Venmo.
Crossposted to Reddit, priority given to "I'll take it" timestamps. I will only communicate via DM after buyer claims the item(s).
CRK Small PJ Sebenza Magnacut $375
DOB: 2/16/2023
I'm at least the second owner, purchased on this sub as like new in box. Sent the knife back to CRK due to a pinched washer upon receipt. Carried for a few months and broke it in the hard way: slow roll with thumb, and ensuing pain. Now glassy smooth, centered, and can drop shut if tuned 1/8 turn loose. Never figured out how to flick it, so I didn't. Honed the edge but not sharpened, disassembled for grease changes a few times, always reassembled per CRK instructions. No Loctite applied or needed in the screws as the titanium, always held the steel in place. Will include box, papers, COA, hank, tools, and tubes of grease/Loctite.
McGizmo Haiku AA 119V $375
At least second owner. Has a Nichia 219B 4000K emitter with HIVE driver. Carried a few times around the office. Bridged the jumper with graphite to program from mode memory to "capped no memory." Cleaned graphite off the jumper as well as residual flux. Beautiful neutral beam with the legendary McGizmo reflector. Mostly light snails on the body. one tiny ding on the head; so small I had trouble finding it but pictured for full disclosure. The factory clip screws with Allen heads were starting to strip, so I swapped out to Torx screws from Reylight. Light blue Loctite applied to the screws.
If you're feeling extra spicy, take both items for $725 and I'll throw in the pictured leather pocket organizer and Arcform pry bar for free.
Good day swappers! I have for you the ultimate EDC upgrade opportunity. Prices include insured shipping within the US (no international sales); funds accepted include PayPal FF, Zelle, and Venmo.
Crossposted to Reddit, priority given to "I'll take it" timestamps. I will only communicate via DM after buyer claims the item(s).
CRK Small PJ Sebenza Magnacut $375
DOB: 2/16/2023
I'm at least the second owner, purchased on this sub as like new in box. Sent the knife back to CRK due to a pinched washer upon receipt. Carried for a few months and broke it in the hard way: slow roll with thumb, and ensuing pain. Now glassy smooth, centered, and can drop shut if tuned 1/8 turn loose. Never figured out how to flick it, so I didn't. Honed the edge but not sharpened, disassembled for grease changes a few times, always reassembled per CRK instructions. No Loctite applied or needed in the screws as the titanium, always held the steel in place. Will include box, papers, COA, hank, tools, and tubes of grease/Loctite.
McGizmo Haiku AA 119V $375
At least second owner. Has a Nichia 219B 4000K emitter with HIVE driver. Carried a few times around the office. Bridged the jumper with graphite to program from mode memory to "capped no memory." Cleaned graphite off the jumper as well as residual flux. Beautiful neutral beam with the legendary McGizmo reflector. Mostly light snails on the body. one tiny ding on the head; so small I had trouble finding it but pictured for full disclosure. The factory clip screws with Allen heads were starting to strip, so I swapped out to Torx screws from Reylight. Light blue Loctite applied to the screws.
If you're feeling extra spicy, take both items for $725 and I'll throw in the pictured leather pocket organizer and Arcform pry bar for free.