Here's a recent catch and release. It was so very nice looking that I had to check it out for myself. For me, it's to good looking to be used and I'm not a safe queen collector. 
Paul made a leather drop loop attachment for it and it looks great.
Totally robbing this from the original sales post from Paul at CPE knives:
*****Here is a new edc design I have been working on. The blade is full hollow ground from 5/32" Magnacut and belt finished to 400 and ultra fine scotch brite. The grind has been reverse tapered for the last half inch to leave a little extra meat on the tip. The result is a very robust tip with a thinner main edge. The tip edge is still very acute and shaving sharp.
The black marks on the blade in a couple of the pictures is just buffing compound that I missed when I was cleaning it.
I managed to get this one down to 4.5 ounces with a full sized contoured handle. As a point of reference the normal G10 Spyderco military is 4.2 ounces so this will feel very similar in the hand or pocket weight wise.
The handle is OD Green micarta with Nickle silver pins and a stainless lanyard tube.
Blade Steel: 5/32" Magnacut
Grind: Full Hollow with a reinforced tip
Blade: 4" Tip to the front of the guard
Handle Material: OD Green micarta with nickle silver pins and a stainless lanyard tube
Overall Length: 8 9/16"
Sheath: Kydex
Weight: 4.5 ounces*****
Asking less than what I paid for it:
$260 FF or $280 G&S...SOLD
**This will be cross posted and I honor the first time stamp. **
View attachment 1936953
Paul made a leather drop loop attachment for it and it looks great.
Totally robbing this from the original sales post from Paul at CPE knives:
*****Here is a new edc design I have been working on. The blade is full hollow ground from 5/32" Magnacut and belt finished to 400 and ultra fine scotch brite. The grind has been reverse tapered for the last half inch to leave a little extra meat on the tip. The result is a very robust tip with a thinner main edge. The tip edge is still very acute and shaving sharp.
The black marks on the blade in a couple of the pictures is just buffing compound that I missed when I was cleaning it.
I managed to get this one down to 4.5 ounces with a full sized contoured handle. As a point of reference the normal G10 Spyderco military is 4.2 ounces so this will feel very similar in the hand or pocket weight wise.
The handle is OD Green micarta with Nickle silver pins and a stainless lanyard tube.
Blade Steel: 5/32" Magnacut
Grind: Full Hollow with a reinforced tip
Blade: 4" Tip to the front of the guard
Handle Material: OD Green micarta with nickle silver pins and a stainless lanyard tube
Overall Length: 8 9/16"
Sheath: Kydex
Weight: 4.5 ounces*****
Asking less than what I paid for it:
$260 FF or $280 G&S...SOLD
**This will be cross posted and I honor the first time stamp. **
View attachment 1936953
Last edited:
