HERE IS A JOE HOOVER LINER LOCK
IS NOW SOLD
My days are of using thumb stud knives are over so I offer this very nice little knife to a good home.
I AM THE ORIGINAL (only) OWNER.
SOLD to any address served by the USPS. Others ship-to options possible just ask.
THESE ARE THE ORIGINAL SPECS FROM JOE
Closed- 3 5/8 inches
Open- 6 1/2 inches
Blade- just shy of 3 inches
Steel- AEB-L
Finish - very light stonewash - now there are faint scratches on the blade too.
Frame- 440c stainless
Finish- File worked spine with frosted finish
Scales- Carbon Fiber
Back Spacer- Floated carved carbon fiber
Clip- RH tip up custom made polished titanium deep carry
Thumbstud- Dual polished Titanium
"Solid edc folder with early solid lock up and centered blade (this was not accurate - see photo below). It opens easily riding on caged bearings. Stainless frame was heat treated for added corrosion resistance. Closes easily with no lock bar stick. All components for this knife with the exception of the caged bearings, screws, and pivot were crafted by hand in my shop. My makers mark is on the frame of this knife. The scale on the lock side has to be removed before it is visible."
__________________________________________________________________________
This knife has been carried and sparingly used but definitely not as a worker - strictly as a dress pants carry. There are a few faint scratches on the blade nonetheless but otherwise in excellent condition. PLEASE BE AWARE - I am selling at a very reduced price because the centering is off as it has been since I first received it and I have used it enough that the blade has evidence of use - a few faint scratches that don't show up in the photos. Blade is very sharp, still of course, can always use refinement as you prefer
.
CENTERING - as shown here is a bit off. This is the original condition.
Very nice file work
Payment - Pay Pal goods preferred but will consider other options.
Questions? More photos? email or PM via links above near my avatar.
"I'll take it" - please post in thread and follow up with PM or email.
Thanks for looking.
Ray
IS NOW SOLD
My days are of using thumb stud knives are over so I offer this very nice little knife to a good home.
I AM THE ORIGINAL (only) OWNER.
SOLD to any address served by the USPS. Others ship-to options possible just ask.
THESE ARE THE ORIGINAL SPECS FROM JOE
Closed- 3 5/8 inches
Open- 6 1/2 inches
Blade- just shy of 3 inches
Steel- AEB-L
Finish - very light stonewash - now there are faint scratches on the blade too.
Frame- 440c stainless
Finish- File worked spine with frosted finish
Scales- Carbon Fiber
Back Spacer- Floated carved carbon fiber
Clip- RH tip up custom made polished titanium deep carry
Thumbstud- Dual polished Titanium
"Solid edc folder with early solid lock up and centered blade (this was not accurate - see photo below). It opens easily riding on caged bearings. Stainless frame was heat treated for added corrosion resistance. Closes easily with no lock bar stick. All components for this knife with the exception of the caged bearings, screws, and pivot were crafted by hand in my shop. My makers mark is on the frame of this knife. The scale on the lock side has to be removed before it is visible."
__________________________________________________________________________
This knife has been carried and sparingly used but definitely not as a worker - strictly as a dress pants carry. There are a few faint scratches on the blade nonetheless but otherwise in excellent condition. PLEASE BE AWARE - I am selling at a very reduced price because the centering is off as it has been since I first received it and I have used it enough that the blade has evidence of use - a few faint scratches that don't show up in the photos. Blade is very sharp, still of course, can always use refinement as you prefer
. CENTERING - as shown here is a bit off. This is the original condition.
Very nice file work
Payment - Pay Pal goods preferred but will consider other options.
Questions? More photos? email or PM via links above near my avatar.
"I'll take it" - please post in thread and follow up with PM or email.
Thanks for looking.
Ray
Last edited:
