PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 471
$199 + 12 shipping
click here to view/purchase
grind: convex
blade length: 3 1/4″
overall length: 7 1/4″
steel: forged 80CrV2 @ 61 Hc
handle: antler with leather stack. black g10 spacers
handle thickness: 3/5 - this knife is on the small side and the handle is most comfortable for medium to small hands
hardware: hammered brass guard, brass mosaic pin
Sheath not included. Sheath options are linked at the bottom of this page.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a 3 stage normalization before being heated to austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is 60-61 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
click here to view/purchase
grind: convex
blade length: 3 1/4″
overall length: 7 1/4″
steel: forged 80CrV2 @ 61 Hc
handle: antler with leather stack. black g10 spacers
handle thickness: 3/5 - this knife is on the small side and the handle is most comfortable for medium to small hands
hardware: hammered brass guard, brass mosaic pin
Sheath not included. Sheath options are linked at the bottom of this page.
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 80CrV2 blade goes through a 3 stage normalization before being heated to austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 80CrV2 Hardness is 60-61 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.