timos-
Knifemaker / Craftsman / Service Provider
- Joined
- Oct 22, 2012
- Messages
- 2,164
My standard Petty Chef Design. This one is made in “tougher than nails” 15N20 lumber saw blade steel.
I ground the blade with a significant distal taper, convexed bevels and a thin but strong tip. This petty will handle just about anything you throw at it. It will slice and dice very well.
Satin finish with a forced patina.
Burned in walnut handle sealed with some industrial strength EVA resin. It is nontoxic.
I was surprised how strong the hold is. The advantage is that the handle can be removed for maintenance.
If you ever have any issues with the knife just let me know - ill take care of it.
This is a great “go to” knife for the kitchen. $250 SHIPPED CONUS
paypal, venmo, cashap are all ok. you can send a good old fashioned check as well.
let me know if you have any questions.
I ground the blade with a significant distal taper, convexed bevels and a thin but strong tip. This petty will handle just about anything you throw at it. It will slice and dice very well.
Satin finish with a forced patina.
Burned in walnut handle sealed with some industrial strength EVA resin. It is nontoxic.
I was surprised how strong the hold is. The advantage is that the handle can be removed for maintenance.
If you ever have any issues with the knife just let me know - ill take care of it.
This is a great “go to” knife for the kitchen. $250 SHIPPED CONUS
paypal, venmo, cashap are all ok. you can send a good old fashioned check as well.
let me know if you have any questions.
