- Joined
- Apr 13, 2017
- Messages
- 2,179
Greetings knifeknuts! Here’s a new Harpoon Hunter up for your consideration.
Steel is 1/8” x 1 1/2” in 80CRV2 with professional HT at 60/61. Hand sanded to P1000 grit for a satin finish. The edge was about .010” before sharpening, it balances at the back of the finger choil and the near sharp swedge flares at the tip for extra strength.
Dimensions: 9 11/16” OAL, Tip to Scales 5 1/8”
The handle is a gorgeous block of Ironwood. It’s sanded to 1200 grit with copper “tube in tube” pins and lanyard. The handle feels great in my average sized hand with room to spare.

Only <SOLD> to your US door, and of course your satisfaction is my only priority. Paypal, check or MO, and the price includes fees and free shipping in the US.
Thanks so much for looking and please feel free to ask anything here or via PM.
Steel is 1/8” x 1 1/2” in 80CRV2 with professional HT at 60/61. Hand sanded to P1000 grit for a satin finish. The edge was about .010” before sharpening, it balances at the back of the finger choil and the near sharp swedge flares at the tip for extra strength.
Dimensions: 9 11/16” OAL, Tip to Scales 5 1/8”
The handle is a gorgeous block of Ironwood. It’s sanded to 1200 grit with copper “tube in tube” pins and lanyard. The handle feels great in my average sized hand with room to spare.

Only <SOLD> to your US door, and of course your satisfaction is my only priority. Paypal, check or MO, and the price includes fees and free shipping in the US.
Thanks so much for looking and please feel free to ask anything here or via PM.
Last edited: