willworship
Gold Member
- Joined
- Jul 19, 2009
- Messages
- 1,197
XM 18 3.5 Spearpoint 20cv Tri-way in full Ti
Upgrades:
- Full-weight Hinderer Ti scale without milling
- Custom stonewash on both the scale and lock side to match
- Hollow grind by BGM knives, and sharpened and stropped it on a KME
- Custom Ti deep carry clip
- Single-hole filler tab
- Skiff bearings, but I will include all the original Tri-way pivot hardware (SS ball bearings on tri-way replaced with ceramic balls)
(Over $280 in upgrades)
The action is perfect, with snappy (but easy) opening with the thumb stud and flipper, and glassy drop-shut action (see Video of knife).
It has been lightly used and carried occasionally. One note: the stop bar rattles slightly when the knife is open (see video above).
Also, throwing in a small yellow Hinderer patch.
SOLD
No trades at this time, please. Let me know if you have any other questions. Thanks for looking!
Upgrades:
- Full-weight Hinderer Ti scale without milling
- Custom stonewash on both the scale and lock side to match
- Hollow grind by BGM knives, and sharpened and stropped it on a KME
- Custom Ti deep carry clip
- Single-hole filler tab
- Skiff bearings, but I will include all the original Tri-way pivot hardware (SS ball bearings on tri-way replaced with ceramic balls)
(Over $280 in upgrades)
The action is perfect, with snappy (but easy) opening with the thumb stud and flipper, and glassy drop-shut action (see Video of knife).
It has been lightly used and carried occasionally. One note: the stop bar rattles slightly when the knife is open (see video above).
Also, throwing in a small yellow Hinderer patch.
SOLD
No trades at this time, please. Let me know if you have any other questions. Thanks for looking!
Last edited:
