PLackey
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 1, 2010
- Messages
- 471
sold shipped with kydex. Reduced due to cosmetic glue gap on spine.
click here to view/order
grind: scandi
blade length: 3″
overall length: 7″
steel: 3/32″ 8670 @ 60 Hc
handle: OD micarta over orange G10
handle thickness: 3.5/5
hardware: Flared Brass Tubes
Includes Kydex Sheath
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 8670 blade is heated austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 8670 Hardness is 60 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
click here to view/order
grind: scandi
blade length: 3″
overall length: 7″
steel: 3/32″ 8670 @ 60 Hc
handle: OD micarta over orange G10
handle thickness: 3.5/5
hardware: Flared Brass Tubes
Includes Kydex Sheath
I began making PL knives in 2016. I've done leather work for over 20. I added kydex to my repertoire in the last 3 years. The heat treat on all of my carbon steel knives is done by me in a thermostatically controlled Evenheat knifemaking kiln. Each 8670 blade is heated austenitic temperature and quenched in Parks 50 oil. Then it goes through a 2 stage tempering process. 8670 Hardness is 60 hrc and my heat treat process produces a blade with extreme toughness and fine edge sharpenability. Scales are glued with West Systems G-flex epoxy. My aim is to produce heirloom quality tools with excellent craftsmanship that will provide a lifetime of enjoyment and service.
Last edited: