Daado
Knifemaker / Craftsman / Service Provider
- Joined
- Apr 5, 2015
- Messages
- 2,298
Two nice knives for sale
Rocketeer Bird and Trout / EDC [SOLD]
Blade was forged from piece of 128mm HE rocket warhead.
It is differential heat treated, and etched in lemon acid to reveal nice hamon.
More information in this thread:
http://www.bladeforums.com/forums/showthread.php/1483268-Rocketeer
I tried to achieve aged look. Bevels are hand polished with 2500 grit and flats are left "brute de forge"
Beautiful piece of stabilized oak burl with some crazy figure is used for the handle.
Black G10 is used for liners, and carbon fiber for pins.
Details:
Overall length - 8,5"
Blade length - 4,4"
Blade width - 1,1"
Thickness at the back of the spine - 1/8"
Tang is tapered to 5/64"
Knife itself weights 3,88 oz, and with sheath is 7,23 oz
Handmade 4mm thick (0,16") vegetable leather sheath, made for right hand vertical carry.
Asking SOLD, priority shipping with tracking number included
52100 Slicer [SOLD]
This one is forged from 52100 round bar.
I've tried to forge it to fit in Bird 'n trout or nice EDC design, but this one is forged really thin.
Blade is forged to shape and it's 0,06" (1,7mm) thick (or thin) .
It's a nice little slicer. Would be great to use it in the kitchen, or outdoors cooking.
Flats are left raw, just soaked overnight in vinegar and wire brushed after forging.
After heat treatment, flats are brushed with scotch brite.
Bevels are made in satin finish with scotch brite.
Details:
Overall length - 8"
Blade length - 3,6"
Blade width - 1"
Thickness at the back of the spine - 0.06"
Knife weight is 2,64oz, and with sheath is 5,64oz
Handle material: Beautiful piece of stabilized plum, black G10 liners, carbon fiber pins and lanyard tube.
Handmade 4mm thick (0,16") vegetable leather sheath.
Asking SOLD, priority shipping with tracking number included
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
Rocketeer Bird and Trout / EDC [SOLD]
Blade was forged from piece of 128mm HE rocket warhead.
It is differential heat treated, and etched in lemon acid to reveal nice hamon.
More information in this thread:
http://www.bladeforums.com/forums/showthread.php/1483268-Rocketeer
I tried to achieve aged look. Bevels are hand polished with 2500 grit and flats are left "brute de forge"
Beautiful piece of stabilized oak burl with some crazy figure is used for the handle.
Black G10 is used for liners, and carbon fiber for pins.
Details:
Overall length - 8,5"
Blade length - 4,4"
Blade width - 1,1"
Thickness at the back of the spine - 1/8"
Tang is tapered to 5/64"
Knife itself weights 3,88 oz, and with sheath is 7,23 oz
Handmade 4mm thick (0,16") vegetable leather sheath, made for right hand vertical carry.
Asking SOLD, priority shipping with tracking number included
52100 Slicer [SOLD]
This one is forged from 52100 round bar.
I've tried to forge it to fit in Bird 'n trout or nice EDC design, but this one is forged really thin.
Blade is forged to shape and it's 0,06" (1,7mm) thick (or thin) .
It's a nice little slicer. Would be great to use it in the kitchen, or outdoors cooking.
Flats are left raw, just soaked overnight in vinegar and wire brushed after forging.
After heat treatment, flats are brushed with scotch brite.
Bevels are made in satin finish with scotch brite.
Details:
Overall length - 8"
Blade length - 3,6"
Blade width - 1"
Thickness at the back of the spine - 0.06"
Knife weight is 2,64oz, and with sheath is 5,64oz
Handle material: Beautiful piece of stabilized plum, black G10 liners, carbon fiber pins and lanyard tube.
Handmade 4mm thick (0,16") vegetable leather sheath.
Asking SOLD, priority shipping with tracking number included
You can PM/email me: seckardalibor@gmail.com
PayPal ( seckardalibor@gmail.com ) accepted.
Thanks for looking.
Dalibor.
Last edited:
