[SOLD]...Steel Will & Sanrenmu Land

Status
Not open for further replies.
Feedback: +37 / =0 / -0
Joined
Aug 15, 2016
Messages
1,763
Up for sale today is some great budget knives that would go great for holiday gifts or simply own yourself!

Paypal G&S, USPS S&H included, lower 48 & signature required on receiving.

Sanrenmu LAND 910 ---> SOLD
Sanrenmu LAND 913 ---> SOLD
Ruike Hussar ---> SOLD
Steel Will Modus ---> SOLD

*Discounts will be applied for multiple purchases.*

cWGApvM.jpg

r3PFXI1.jpg

igUF1gT.jpg

Sanrenmu LAND 910 Ti: This was the first 910 with the titanium frame. Has 12C27 blade steel. I found this out of Poland. The frame is anodized a beautiful bronze & deep blue on a satin finish. The hardware was etched & cleaned. The blade was etched, stonewashed & stropped. Not used or carried. No lock rock, no blade play. Bearings make it smooth & has great deployment.----> SOLD

https://i.imgur.com/DCm7for.jpg
https://i.imgur.com/o2pqo8Y.jpg
https://i.imgur.com/CASrxZE.jpg
https://i.imgur.com/cwSttAK.jpg


Sanrenmu LAND 913: This is the 910 but with a steel stonewashed frame. Has 12C27 blade steel. The thumbstuds were real sharp so the edges were knocked down & feels much better when deploying. Used to cut tape, never carried. No lock rock, no blade play. Bearings make it smooth & has great deployment.----> SOLD
https://i.imgur.com/6v9AbG0.jpg
https://i.imgur.com/0ASgWNx.jpg
https://i.imgur.com/OiTFrIv.jpg
https://i.imgur.com/Nom2D4o.jpg


Ruike Hussar: Ruike made this one real good. Has 14C28N blade steel. The G10 was sanded on all the edges & is real comfortable in hand now. Skeletonized steel liners for weight savings. Never used or carried. No lock rock or blade play. Bearings make it smooth & has great deployment.----> SOLD
https://i.imgur.com/Z96qMsV.jpg
https://i.imgur.com/KDJxopP.jpg
https://i.imgur.com/oZE2Umq.jpg
https://i.imgur.com/4oECgfG.jpg


Steel Will Modus (D2): I liked this one so much I bought two, now one must go. Professionally modified the "pocket pecker", much more comfortable in pocket & while deploying. Scale edge finger groove behind lock bar is sanded for comfort. Has D2 blade steel. Has the tiniest bit of blade play which 90% of all my Benchmades had & doesn't affect use. Never used to cut. No lock rock. Bronze washers are smooth & has great deployment.----> SOLD
https://i.imgur.com/iHzvDYy.jpg
https://i.imgur.com/kisRfds.jpg
https://i.imgur.com/XWbGEv8.jpg
https://i.imgur.com/FtbufuP.jpg
https://i.imgur.com/cKBUn2M.jpg
https://i.imgur.com/ZU0Ej5I.jpg
https://i.imgur.com/hFgkFCC.jpg
https://i.imgur.com/oILC0OI.jpg

All knives come with original boxes/papers, except the Hussar which will come with a Benchmade box.
 
Last edited:
I will take the Ruike Hussar. If you would do it plus the Sanrenmu LAND 913 for $30 I would do that
 
Status
Not open for further replies.
Back
Top