(SOLD) Wicked Edge full kit (older version)

Jokkamofeenanay

Gold Member
Feedback: +122 / =0 / -0
Joined
Sep 21, 2018
Messages
474
I just got this in less than a week ago from a trade here with a solid BF member. Frankly, after unpacking it and setting up it up, I realized that this thing is just too freakin' huge for me, and I'm going to go back to the considerably smaller footprint KME system. Here's the sales thread from last week: https://www.bladeforums.com/threads/sold-wicked-edge.1680642/

The description from the original owner/seller states that the diamond stones (two each of 50/80, 100/200, 400/600, 800/1000 and 1500 grit) have about 80% life left in them, and this seems about right to me. They look to be in very good shape. The previous owner also modified the stones' plastic holders by cutting them down on the side to get closer to the choil of knife being sharpened. The vise jaws were also ground down a bit for lower angles.

Kit also includes pairs of ceramic stones (I think they're ceramic, at least) of 1200 & 1600 grit, pairs of glass platen/holders for lapping tape, pairs of leather and balsa strops/holders. Really, only the leather strops are in a condition that merits replacement in the near future. Other items included: a Tormek small knife attachment, upgraded rods with micro adjustments, four tubes of 5, 3.5, 1, 0.5 micron stropping compound (1 micron has just a little bit left, but other three have a pretty good bit). Wrench, depth pin, solid base, and hard Pelican case (HUGE and bomb-proof) are also included.

The original owner/seller stated that he had over $1,000 invested in this system, which may even be a low estimate.

SOLD - includes shipping in CONUS only, which by the way is pretty expensive for this behemoth.
 

Attachments

  • IMG_20190904_185523.jpg
    IMG_20190904_185523.jpg
    71.8 KB · Views: 75
  • IMG_20190904_190258.jpg
    IMG_20190904_190258.jpg
    103.8 KB · Views: 77
  • 00000IMG_00000_BURST20190904190706795_COVER.jpg
    00000IMG_00000_BURST20190904190706795_COVER.jpg
    92 KB · Views: 73
  • 00000IMG_00000_BURST20190904190923953_COVER.jpg
    00000IMG_00000_BURST20190904190923953_COVER.jpg
    100.5 KB · Views: 74
  • 00000IMG_00000_BURST20190904191205987_COVER.jpg
    00000IMG_00000_BURST20190904191205987_COVER.jpg
    85.7 KB · Views: 72
  • 00000IMG_00000_BURST20190904191328402_COVER.jpg
    00000IMG_00000_BURST20190904191328402_COVER.jpg
    79.6 KB · Views: 74
  • 00000IMG_00000_BURST20190904191543470_COVER.jpg
    00000IMG_00000_BURST20190904191543470_COVER.jpg
    92.8 KB · Views: 75
  • 00000IMG_00000_BURST20190904191953154_COVER.jpg
    00000IMG_00000_BURST20190904191953154_COVER.jpg
    83.4 KB · Views: 73
  • 00100lPORTRAIT_00100_BURST20190904191740166_COVER.jpg
    00100lPORTRAIT_00100_BURST20190904191740166_COVER.jpg
    30.2 KB · Views: 72
  • 00100lPORTRAIT_00100_BURST20190904191800723_COVER.jpg
    00100lPORTRAIT_00100_BURST20190904191800723_COVER.jpg
    50.1 KB · Views: 73
Last edited:
Would you consider $350
Thank you

Not trying to come off like a d*ck or BF Nazi, but if you're going to offer something other than my asking price, please don't post it on the sales thread. I highly recommend getting a BF membership ($30, I think) and using the PM feature. If you don't want to go this route, post your email on my profile page and I'll get back to you.

I think most people who use this forum would be in agreement that posting on a sales thread should be limited to something like "I'll take it", or "Seconds", etc., with PM feature to be used for questions about the items being sold, trade offers, alternate offers, general conversation, etc.
 
PM sent.

BTW, I've considered only selling to members for the first 24 hours of a post. I concur with your post above.
 
Back
Top