Howdy folks,
Up for sale is a BNIB Will Moon MK7 framelock. I just received this a few days ago direct from Will, so it's a catch and release. It is MK7 #4 from his first run back in October 2013. This is a GREAT knife but it is too big for my needs sadly
a 3" version would be perfect... Anyway, I've carried this once and never cut a thing with it. It seems to be VERY sharp but as I haven't cut anything with it, can't say that based on experience. Knife blade completely disappears into the frame.
General specs will be listed below but the options I had added were: blue anodized frame, moonglow inlays (tiny round inlay on flipper tab), satin flats and stonewashed bevels on the blade, spanto grind.
This is a flipper (of course) and is verrrrrrry smooth. Flips open quickly, lock up is very early and solid. The blade appears to be slightly off center towards the non-locking side... not sure on that but it seems to be a little, but it DOES NOT rub or contact the frame at all. My pics aren't the greatest so for full disclosure, this is not a 'flawless' knife. The fit and finish is great but it is not flawless, it is a handmade knife and has small imperfections such as anodizing not 100% even, tiny scuff on blade near handle. Nothing glaringly obvious by any stretch, but if you're a nitpicker I don't want you to be surprised!
Specs from Will's site:
Blade Length: 3.5 inches
Blade Height: 1 inch
Overall Open Length: 8.5 inches
Closed Length: 5 inches
Weight: 4.5- 5.0 ounces (Depending on blade and handle options selected)
Blade Thickness: .125 inches
Lockbar Thickness: .2 inches
Handle Thickness: .56" at the Bolster, tapers to .39" at the Pocket Clip
Handle Material: 6Al4V/Grade 5 Titanium
Spacer Material: 6Al4V/Grade 5 Titanium
Pocket Clip Material: 6AL4V/Grade 5 Titanium
Blade Material: CPM-154
Pics below:
I prefer to keep the sale in Canada because this is a fairly expensive knife, however, I will ship the the US if you assume responsibility once it leaves Canada.
Looking for $800 shipped, PayPal only. Not looking for trades at this time. As usual, the first "I'll take it!" gets it. I do reserve the right to sell to whomever I see fit. Email or PM me with any questions or concerns!
Thanks for looking!!
Up for sale is a BNIB Will Moon MK7 framelock. I just received this a few days ago direct from Will, so it's a catch and release. It is MK7 #4 from his first run back in October 2013. This is a GREAT knife but it is too big for my needs sadly
a 3" version would be perfect... Anyway, I've carried this once and never cut a thing with it. It seems to be VERY sharp but as I haven't cut anything with it, can't say that based on experience. Knife blade completely disappears into the frame.General specs will be listed below but the options I had added were: blue anodized frame, moonglow inlays (tiny round inlay on flipper tab), satin flats and stonewashed bevels on the blade, spanto grind.
This is a flipper (of course) and is verrrrrrry smooth. Flips open quickly, lock up is very early and solid. The blade appears to be slightly off center towards the non-locking side... not sure on that but it seems to be a little, but it DOES NOT rub or contact the frame at all. My pics aren't the greatest so for full disclosure, this is not a 'flawless' knife. The fit and finish is great but it is not flawless, it is a handmade knife and has small imperfections such as anodizing not 100% even, tiny scuff on blade near handle. Nothing glaringly obvious by any stretch, but if you're a nitpicker I don't want you to be surprised!
Specs from Will's site:
Blade Length: 3.5 inches
Blade Height: 1 inch
Overall Open Length: 8.5 inches
Closed Length: 5 inches
Weight: 4.5- 5.0 ounces (Depending on blade and handle options selected)
Blade Thickness: .125 inches
Lockbar Thickness: .2 inches
Handle Thickness: .56" at the Bolster, tapers to .39" at the Pocket Clip
Handle Material: 6Al4V/Grade 5 Titanium
Spacer Material: 6Al4V/Grade 5 Titanium
Pocket Clip Material: 6AL4V/Grade 5 Titanium
Blade Material: CPM-154
Pics below:
I prefer to keep the sale in Canada because this is a fairly expensive knife, however, I will ship the the US if you assume responsibility once it leaves Canada.
Looking for $800 shipped, PayPal only. Not looking for trades at this time. As usual, the first "I'll take it!" gets it. I do reserve the right to sell to whomever I see fit. Email or PM me with any questions or concerns!
Thanks for looking!!
Last edited:
