- Joined
- Jul 12, 2012
- Messages
- 2,174
Hello fellow B.F.ers. Up for sale is a Kingdom Armory Framelock Straight Razor Knife that comes in a signed Pelican case by Dave with a handmade logo next to it. It was made by Dave, the owner of Kingdom Armory. Price is $SOLD$ net (plus 3.5% P.P. fees) and I will cover USPS Priority shipping and full Insurance. Pay Pal only, No Trades, First "I'll Take It" followed by a PM gets it. For full disclosure-there is a tiny blemish on the back side near the pivot screw which is so small I could not get it to focus with the camera, otherwise it has never been carried, or cut even a piece of paper. This price is less than half of the cost of one of Dave's customs and this is a full blown one off custom, plus his books are closed for at least the next two years. Great price, great knife.
The following is a quote from Dave's thread about the knife and its specs:
"This, like the Jack Knife is an EXP design. Very thin, hollow chisel ground blade in S30V. Framelock is .180" Ti, with a matte bronze finish on the flats and a satin broze/copper finish on the edges. Scale side is composed of .60Ti liner finished to match the framelock, with a cocobolo scale and hand hammered silica bronze bolster. As you can see from the pics, the bolster is installed blind and hides all the pivot hardware. I finished it off with a traditional antiqued patina. I also tried to match that finish on the phosphor bronze overtravel stop that is installed on the framelock side. Overall, I wanted something technical in design but antique in finish. So far, I think this has turned out to be one of my favorite folders..."
specs:
OAL when open 7 1/8"
OAL when closed 4"
Width 5/8"
Weight 4.5oz
View attachment 399997View attachment 399996View attachment 399999View attachment 399998View attachment 400000
The following is a quote from Dave's thread about the knife and its specs:
"This, like the Jack Knife is an EXP design. Very thin, hollow chisel ground blade in S30V. Framelock is .180" Ti, with a matte bronze finish on the flats and a satin broze/copper finish on the edges. Scale side is composed of .60Ti liner finished to match the framelock, with a cocobolo scale and hand hammered silica bronze bolster. As you can see from the pics, the bolster is installed blind and hides all the pivot hardware. I finished it off with a traditional antiqued patina. I also tried to match that finish on the phosphor bronze overtravel stop that is installed on the framelock side. Overall, I wanted something technical in design but antique in finish. So far, I think this has turned out to be one of my favorite folders..."
specs:
OAL when open 7 1/8"
OAL when closed 4"
Width 5/8"
Weight 4.5oz
View attachment 399997View attachment 399996View attachment 399999View attachment 399998View attachment 400000
Last edited: